Intelligent charger designed for all types of 14.4V (4 cells) Li-Ion Battery packs including Polymer Li-Ion and Cylindral Li-Ion.
Worldwide input AC power from 110V --- 240V.
1500 mA (1.5A ) constant charging current for faster charging, save your much more time.
Charging time for 4000mAh battery pack is about 2.6 Hrs. ( Please use it to charge Li-Ion battery with capacity > 1500mAh)
Built in IC to cut off power automatically when battery is fully charge.
Red Lead will show Battery in charging and Green LED shows full. (LED also is full without battery).
Two pins male connector is for connecting to Li-Ion battery pack
One 5' cable with male connector is included , which allow you connect it to a battery pack and fits with the smart charger.
Dimension: 2.5" L x 1.25" W x 1" H.
Compact size and lightweight. It is perfect to charger our 14.4V Li-Ion battery pack module and 14.4V Li-Ion battery pack for bike-lighting
Warning:
Only charge Li-Ion battery pack with capacity more than 1500 mAh. Don't use the charger for lower capacity Li-Ion battery pack.
Only charge Li-Ion battery pack with voltage 14.8V ( 4 cell pack ) . Don't use the charger for Lower voltage battery pack, whcih may cayse battery exploded
We are not responsible for any damage baused by user and miss use.
Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery packs from over charge, over discharge and accidental battery explosion due to its extra high energy density. This Protection Circuit Board is specially designed for 29.6V 8 Cells Li-Ion Battery packs made of Li-ion and Li-Polymer cells.
Keep 29.6V Li-Ion Battery pack from overcharge and over discharge
Keep 29.6V Li-Ion Battery pack 's discharging current lower than 10 A
Short Cut Protection
8 Cells Li-ion / Li-polymer Battery Pack ( 29.6V up to 20 Ah)
Battery Protection
Dimension: 2.87" x 1.69 " inch
PCB Indications
B+ Battery (+)
B- Battery (-)
P+ OUT (+) /Load (+)
C+ OUT (+) /Charge (+)
P- OUT (-) /Charge(-) / Load(-)
Electric performance
Overcharge Protection voltage for single cell: 4.235V +/- 0.025V
Overdischarge Protection voltage for single cell: 2.30V +/-0.08V