Li Ion

Features and Benefits

• Lithium Ion 18650 cylindrical rechargeable battery with tab;
  
• 3.7V 2000mAh high capacity
  
• Higher energy density and lower weight than other types rechargeable batteries
  
• Manufactured under ISO9001-2000 to assure quality
  
• Internal PCB protects against under and over charging- low voltage 2.8, high voltage 4.2.
  
• Battery tested based on International Electrotechnical Commission (IEC) standard to ensure capacity, quality and life time
  

Applications

• Building Laptop Battery
  
• Building portable power device needing high energy density and low weight
  

Cautions

• Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.
  
• Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.
  
• We are not responsible for any damage caused by misuse or mishandling of theses Li-Ion batteries
  
  

Product Specifications

• Capacity* Nominal 2000 mAh, Minimum 1950 mAh
  
• Dimensions:
  Diameter 18+/- 0.2 mm
  Height 68+/- 0.2mm
  
• Weight (Typical) Approx. 46 g yes
  
• Nominal Voltage: Average 3.7V
  
• Cut-off Voltage: 3.0V
  
• Internal Impedance: less or equal to 180 milliohm (with PTC)
  
• Cycle Performance: 90% of initial capacity at 400 cycles
  
• Cycle life: > 500 cycles
  
• Charge: Current = 0.5C mA Voltage = 4.2 V End Current = 0.01 mA
  
• Discharge: Current = 0.5C mA End Voltage = 3.0V
  
• Max. Charging current: 1.5C ma
  
• Max. Discharging current 1.5C ma (for continuous discharge)

Prismatic Polymer Li-Ion Battery, 3.7V, 430mAh for RC Car and RC Plane or Micro Device

Cautions

• Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.
  
• Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.
  
• We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteries
  

Prismatic Polymer Li-Ion Battery, 3.7V, 875mAh (383562) for RC Car and RC Plane or Micro Device

Cautions

• Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.
  
• Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.
  
• We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteries
  

Features and Benefits

• Protection Circuit Board for 11.1V Li-ion and Li-polymer battery pack
  
• Designed for 11.1V Li-ion or Li-Polymer battery
  
• Prevent 11.1V Li-ion or Li-polymer battery from over-charging, over-discharging and from discharging current more than 5A.
  
  

Connection Instruction

Port # Connection
B+ To battery (+)
B- To battery (-)
P- Output (+) r Charger (+)
P+ Output (+) r Charger (+)
B1- To battery 2 (+) and battery 3 (-)
B2- To battery 1 (+) and battery 2 (-)

Features and Benefits

• Intelligent charger for Lithium Ion cells with individual detection per bay
  
• Charges for 18650 and 17500 Li-ion cells with spring loaded terminals instantly adapts to 18650 and 17500 cells
  
• Universal Voltage Inputs that accepts 100-240 volts, can be used worldwide travel
  
• Indication LED's for charge status and completion
  
• Open voltage of 5 volts.
  
• Charging Current: 1000mA
• UL Approval
  
  

Caution

This charger is optimally designed for protected cells although will work with unprotected cells. Tolerance of this charger may allow charge of unprotected cells up to 4.3 volts, this is still safe for unprotected cells although is not optimal for cells durability of recharge cycles. Due to the high current of this unit, do not use it with spacers to charge smaller cells such as the CR123.

Prismatic Polymer Li-Ion Battery, 3.7V, 2700mAh for Lighting and Laptop

Cautions

• Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.
  
• Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.
  
• We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteries
  

Features and Benefits

• Lithium Ion 18650 cylindrical rechargeable battery with tab;
  
• 3.7V 2000mAh high capacity
  
• Higher energy density and lower weight than other types rechargeable batteries
  
• Manufactured under ISO9001-2000 to assure quality
  
• Internal PCB protects against under and over charging- low voltage 2.8, high voltage 4.2.
  
• Battery tested based on International Electrotechnical Commission (IEC) standard to ensure capacity, quality and life time
  

Applications

• Building Laptop Battery
  
• Building portable power device needing high energy density and low weight
  

Cautions

• Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.
  
• Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.
  
• We are not responsible for any damage caused by misuse or mishandling of theses Li-Ion batteries
  
  

Product Specifications

• Capacity* Nominal 2000 mAh, Minimum 1950 mAh
  
• Dimensions:
  Diameter 18+/- 0.2 mm
  Height 68+/- 0.2mm
  
• Weight (Typical) Approx. 46 g yes
  
• Nominal Voltage: Average 3.7V
  
• Cut-off Voltage: 3.0V
  
• Internal Impedance: less or equal to 180 milliohm (with PTC)
  
• Cycle Performance: 90% of initial capacity at 400 cycles
  
• Cycle life: > 500 cycles
  
• Charge: Current = 0.5C mA Voltage = 4.2 V End Current = 0.01 mA
  
• Discharge: Current = 0.5C mA End Voltage = 3.0V
  
• Max. Charging current: 1.5C ma
  
• Max. Discharging current 1.5C ma (for continuous discharge)

Specifications:

Easy Connection:

Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery from over charge, over discharge and prevent accidental battery explosion due to its extra high energy density. This protection circuit board is specially designed for 18.5v Li-Ion Battery packs made of Li-ion and Li-Polymer cells.

• Keep 18.5V Li-Ion Battery packs from overcharge and over discharge
• Limit the Max discharge Current to 8.0 A.
• Designed for 5 Cells?€?Li-ion /Li-polymer Battery Packs
• Li-ion/Polymer Battery Protection
• SEIKO S8233 Protection IC
• IR IRF4906, FDS9926 MOSFET
• Dimension: 3.55" x 0.8"inch

PCB Indications

• B+ Battery (+)
• B- Battery (-)
• P+ OUT (+) /Load (+)
• C+ OUT (+) /Charge (+)
• P- OUT (-) /Charge(-) / Load(-)

Electric performance

• Overcharge Protection voltage for single cell:4.235V +/- 0.025V
• Over discharge Protection voltage for single cell:2.30V+/-0.08V
• Over current detection Protection:<=8 A +/-1A
• Supply current:MAX 600uA
• Short circuit Protection
• 0 V charge
• Protection circuit Resistance: <=10 mill-oHms

Features and Benefits

• Universal Li-Ion battery charger  for18650, RCR123A, 17670 3.7V Li-Ion cells. 
  
• Can be used anywhere worldwide with 100-240 V input. Good for oversea travel.
  
• Smart charger automatic cut-off  
• LED light for charging status indication:
  
  • Orange for charging and green for charging completed  
  • If LED light is off, the cells are not suitable for charging with unit.
• UL Approval.

Product Specifications

• Power Input: AC110~240V, 50/60Hz
  
• Power Output: DC5.5V-350mA
  
• Charging time
     800mAh:    3 hours
     2000mAh:  8.5 hours
     2200mAh:  9.5 hours
  
• Dimension:  3 13/16" x 2 3/8" x 1 5/16"
  
• Weight:       3.9oz charger and adaptor together

Cautions

• Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.
  
• Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.
  
• We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteries
  

• Intelligent charger designed for all types of 14.4V (4 cells) Li-Ion Battery packs including Polymer Li-Ion and Cylindral Li-Ion.
• Worldwide input AC power from 110V --- 240V.
• 1500 mA (1.5A ) constant charging current for faster charging, save your much more time.
• Charging time for 4000mAh battery pack is about 2.6 Hrs. ( Please use it to charge Li-Ion battery with capacity > 1500mAh)
• Built in IC to cut off power automatically when battery is fully charge.
• Red Lead will show Battery in charging and Green LED shows full. (LED also is full without battery).
• Two pins male connector is for connecting to Li-Ion battery pack
• One 5' cable with male connector is included , which allow you connect it to a battery pack and fits with the smart charger.
• Dimension: 2.5" L x 1.25" W x 1" H.
• Compact size and lightweight. It is perfect to charger our 14.4V Li-Ion battery pack module and 14.4V Li-Ion battery pack for bike-lighting

Warning:

• Only charge Li-Ion battery pack with capacity more than 1500 mAh. Don't use the charger for lower capacity Li-Ion battery pack.
• Only charge Li-Ion battery pack with voltage 14.8V ( 4 cell pack ) . Don't use the charger for Lower voltage battery pack, whcih may cayse battery exploded
• We are not responsible for any damage baused by user and miss use.

Cautions

• Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.
  
• Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.
  
• We are not responsible for any damage caused by misuse or mishandling of these Polymer Li-Ion batteries