You are here: Home » Protection Circuit Module ( PCB ) For 11.1V Li-Ion Battery Pack (3 Cells With 6.5A Limit )
Add to Google

Protection Circuit Module ( PCB ) For 11.1V Li-Ion Battery Pack (3 Cells With 6.5A Limit )

  • Protection Circuit Module ( PCB ) For 11.1V Li-Ion Battery Pack (3 Cells With 6.5A Limit )
    Protection Circuit Module ( PCB ) For 11.1V Li-Ion Battery Pack (3 Cells With 6.5A Limit )
    Li Ion

    Features and Benefits

    • Protection Circuit Board for 11.1V Li-ion and Li-polymer battery pack
    • Designed for 11.1V Li-ion or Li-Polymer battery
    • Prevent 11.1V Li-ion or Li-polymer battery from over-charging, over-discharging and from discharging current more than 5A.

    Connection Instruction

    Port # Connection
    B+ To battery (+)
    B- To battery (-)
    P- Output (+) r Charger (+)
    P+ Output (+) r Charger (+)
    B1- To battery 2 (+) and battery 3 (-)
    B2- To battery 1 (+) and battery 2 (-)



    Technical Specifications

    Overcharge Protection voltage 4.35V +/- 0.025V per single cell
    Overdischarge Protection voltage 2.4V +/-0.08V per single cell
    Overcurrent detection Protection 6.5 A (max) at 12.6V
    Continuous working current 3.0A (max) at 10.8V
    Over-charge protection response time 1 second (typical)
    Over-discharge protection response time 0.1 second (typical)
    Current consumption 30uA (max)
    Idle current 0.1uA (max)
    Internal resistance 130 m-ohms
    0V charging capability Yes
    Working temperature -40 ~ 85 C
    Dimensions Length 50+/-0.3mm
    Width 16+/-0.2mm
    Thickness 3.5mm (max)


    Application Notes

    • Do not subject the PCB to input voltage over 20V. INput voltage over 20V will damage the PCB
    • Please use the compatible charger for your battery pack. Special attention to your input and output voltage, current to avoid PCB damage
    • When mixing over-charged batteries and over-discharged batteries together, PCB will be in dual state of over-charging and over-discharging. In this situation, charging and dis-charging are both disabled
    • Internal static charge protection circuit built into the PCB. But not subject the PCB to high static charge to avoid damage.
    • Without the written agreement from us, please don't use this PCB for application in medical instruments, emergence devices, auto and airspace vehicles or other device that might have impact on human body.

    Because of the very high energy density, Li-Ion Battery pack must be connected to a protection circuit module to prevent accidental battery explosion caused by over-charging or over-discharging.


    $9.75
    + Add to my saved list

    Buy NOW

 

Similar Products

Magnify Protection Circuit Module ( PCB ) For 18.5V Li-Ion Battery Pack (5 Cells With 8A Limit )
Protection Circuit Module ( PCB ) For 18.5V Li-Ion Battery Pack (5 Cells With 8A Limit )
Protection Circuit Module ( PCB ) For 18.5V Li-Ion Battery Pack (5 Cells With 8A Limit )
Li Ion

Specifications:

Easy Connection:

Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery from over charge, over discharge and prevent accidental battery explosion due to its extra high energy density. This protection circuit board is specially designed for 18.5v Li-Ion Battery packs made of Li-ion and Li-Polymer cells.

  • Keep 18.5V Li-Ion Battery packs from overcharge and over discharge
  • Limit the Max discharge Current to 8.0 A.
  • Designed for 5 Cells?€?Li-ion /Li-polymer Battery Packs
  • Li-ion/Polymer Battery Protection
  • SEIKO S8233 Protection IC
  • IR IRF4906, FDS9926 MOSFET
  • Dimension: 3.55" x 0.8"inch

PCB Indications

  • B+ Battery (+)
  • B- Battery (-)
  • P+ OUT (+) /Load (+)
  • C+ OUT (+) /Charge (+)
  • P- OUT (-) /Charge(-) / Load(-)

Electric performance

  • Overcharge Protection voltage for single cell:4.235V +/- 0.025V
  • Over discharge Protection voltage for single cell:2.30V+/-0.08V
  • Over current detection Protection:<=8 A +/-1A
  • Supply current:MAX 600uA
  • Short circuit Protection
  • 0 V charge
  • Protection circuit Resistance: <=10 mill-oHms

Review this product
+ Add to my saved list
 
    $18.99

Buy Now
Magnify Protection Circuis Module ( PCB ) For 3.6V Li-Polymer Battery (3.5A Limit)
Protection Circuis Module ( PCB ) For 3.6V Li-Polymer Battery (3.5A Limit)
Protection Circuis Module ( PCB ) For 3.6V Li-Polymer Battery (3.5A Limit)
Batteries

Features and Benefits

  • Protection Circuit Board for 3.6V Li-ion and Li-polymer battery pack
  • Designed for 3.6V Li-ion or Li-Polymer battery
  • Prevent 3.6V Li-ion or Li-polymer battery from over-charging, over-discharging and from discharging current more than 3.5A.

Because of the very high energy density, Li-Ion Battery pack must be connected to a protection circuit module to prevent accidental battery explosion caused by over-charging or over-discharging.


Review this product
+ Add to my saved list
 
    $1.19

Buy Now
Magnify Protection Circuit Module ( PCB ) For 29.6V Li-Ion/Li-Polymer Battery Pack (8 Cells With 10A Limit )
Protection Circuit Module ( PCB ) For 29.6V Li-Ion/Li-Polymer Battery Pack (8 Cells With 10A Limit )
Protection Circuit Module ( PCB ) For 29.6V Li-Ion/Li-Polymer Battery Pack (8 Cells With 10A Limit )
Li Ion

Specifications:

Easy Connection:

Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery packs from over charge, over discharge and accidental battery explosion due to its extra high energy density. This Protection Circuit Board is specially designed for 29.6V 8 Cells Li-Ion Battery packs made of Li-ion and Li-Polymer cells.

  • Keep 29.6V Li-Ion Battery pack from overcharge and over discharge
  • Keep 29.6V Li-Ion Battery pack 's discharging current lower than 10 A
  • Short Cut Protection
  • 8 Cells Li-ion / Li-polymer Battery Pack ( 29.6V up to 20 Ah)
  • Battery Protection
  • Dimension: 2.87" x 1.69 " inch

PCB Indications

  • B+ Battery (+)
  • B- Battery (-)
  • P+ OUT (+) /Load (+)
  • C+ OUT (+) /Charge (+)
  • P- OUT (-) /Charge(-) / Load(-)

Electric performance

  • Overcharge Protection voltage for single cell: 4.235V +/- 0.025V
  • Overdischarge Protection voltage for single cell: 2.30V +/-0.08V
  • Overcurrent detection Protection <= 10 A +/-1A
  • Supply current: MAX 600uA
  • Short circuit Protection
  • 0 V charge
  • Protection circuitry Resistance: <= 10 mohms


Review this product
+ Add to my saved list
 
    $37.99

Buy Now
Magnify Protection Circuit Module ( PCB ) For 37V Li-Ion/Li-Polymer Battery Pack (10 Cells With 27A Limit )
Protection Circuit Module ( PCB ) For 37V Li-Ion/Li-Polymer Battery Pack (10 Cells With 27A Limit )
Protection Circuit Module ( PCB ) For 37V Li-Ion/Li-Polymer Battery Pack (10 Cells With 27A Limit )
Li Ion

Specifications:

Easy Connection:

Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery packs from over charge, over discharge and accidental battery explosion due to its extra high energy density. This Protection Circuit Board is specially designed for 37 V Li-Ion Battery packs made of Li-ion and Li-Polymer cells.

  • Keep 37V Li-Ion Battery pack from overcharge and over discharge
  • Keep 37V Li-Ion Battery pack 's discharging current lower than 27 A
  • Short Cut Protection
  • 10 Cells Li-ion / Li-polymer Battery Pack ( 37V up to 27 Ah)
  • Battery Protection
  • Dimension: "2.4" x 3.25" inch

PCB Indications

  • B+ Battery (+)
  • B- Battery (-)
  • P+ OUT (+) /Load (+)
  • C+ OUT (+) /Charge (+)
  • P- OUT (-) /Charge(-) / Load(-)

Electric performance

  • Overcharge Protection voltage for single cell: 4.235V +/- 0.025V
  • Over discharge Protection voltage for single cell: 2.30V +/-0.08V
  • Over current detection Protection <= 27A~33A
  • Supply current: MAX 300uA
  • Short circuit Protection
  • 0 V charge Protection
  • Circuit Board Resistance: <= 6.67 milliOhms

Review this product
+ Add to my saved list
 
    $45.99

Buy Now