Protection Circuit Module ( PCB ) For 22.2V Li-Ion Battery Pack (6 Cells With 8A Limit )

Specifications:

Easy Connection:

Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery from over charge, over discharge and prevent accidental battery explosion due to its extra high energy density. This protection circuit board is specially designed for 18.5v Li-Ion Battery packs made of Li-ion and Li-Polymer cells.

• Keep 18.5V Li-Ion Battery packs from overcharge and over discharge
• Limit the Max discharge Current to 8.0 A.
• Designed for 5 Cells?€?Li-ion /Li-polymer Battery Packs
• Li-ion/Polymer Battery Protection
• SEIKO S8233 Protection IC
• IR IRF4906, FDS9926 MOSFET
• Dimension: 3.55" x 0.8"inch

PCB Indications

• B+ Battery (+)
• B- Battery (-)
• P+ OUT (+) /Load (+)
• C+ OUT (+) /Charge (+)
• P- OUT (-) /Charge(-) / Load(-)

Electric performance

• Overcharge Protection voltage for single cell:4.235V +/- 0.025V
• Over discharge Protection voltage for single cell:2.30V+/-0.08V
• Over current detection Protection:<=8 A +/-1A
• Supply current:MAX 600uA
• Short circuit Protection
• 0 V charge
• Protection circuit Resistance: <=10 mill-oHms

Features and Benefits

• Protection Circuit Board for 3.6V Li-ion and Li-polymer battery pack
  
• Designed for 3.6V Li-ion or Li-Polymer battery
  
• Prevent 3.6V Li-ion or Li-polymer battery from over-charging, over-discharging and from discharging current more than 3.5A.
  

Because of the very high energy density, Li-Ion Battery pack must be connected to a protection circuit module to prevent accidental battery explosion caused by over-charging or over-discharging.

Specifications:

Easy Connection:

Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery packs from over charge, over discharge and accidental battery explosion due to its extra high energy density. This Protection Circuit Board is specially designed for 29.6V 8 Cells Li-Ion Battery packs made of Li-ion and Li-Polymer cells.

• Keep 29.6V Li-Ion Battery pack from overcharge and over discharge
• Keep 29.6V Li-Ion Battery pack 's discharging current lower than 10 A
• Short Cut Protection
• 8 Cells Li-ion / Li-polymer Battery Pack ( 29.6V up to 20 Ah)
• Battery Protection
• Dimension: 2.87" x 1.69 " inch

PCB Indications

• B+ Battery (+)
• B- Battery (-)
• P+ OUT (+) /Load (+)
• C+ OUT (+) /Charge (+)
• P- OUT (-) /Charge(-) / Load(-)

Electric performance

• Overcharge Protection voltage for single cell: 4.235V +/- 0.025V
• Overdischarge Protection voltage for single cell: 2.30V +/-0.08V
• Overcurrent detection Protection <= 10 A +/-1A
• Supply current: MAX 600uA
• Short circuit Protection
• 0 V charge
• Protection circuitry Resistance: <= 10 mohms

Specifications:

Easy Connection:

Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery packs from over charge, over discharge and accidental battery explosion due to its extra high energy density. This Protection Circuit Board is specially designed for 37 V Li-Ion Battery packs made of Li-ion and Li-Polymer cells.

• Keep 37V Li-Ion Battery pack from overcharge and over discharge
• Keep 37V Li-Ion Battery pack 's discharging current lower than 27 A
• Short Cut Protection
• 10 Cells Li-ion / Li-polymer Battery Pack ( 37V up to 27 Ah)
• Battery Protection
• Dimension: "2.4" x 3.25" inch

PCB Indications

• B+ Battery (+)
• B- Battery (-)
• P+ OUT (+) /Load (+)
• C+ OUT (+) /Charge (+)
• P- OUT (-) /Charge(-) / Load(-)

Electric performance

• Overcharge Protection voltage for single cell: 4.235V +/- 0.025V
• Over discharge Protection voltage for single cell: 2.30V +/-0.08V
• Over current detection Protection <= 27A~33A
• Supply current: MAX 300uA
• Short circuit Protection
• 0 V charge Protection
• Circuit Board Resistance: <= 6.67 milliOhms