Li Ion

Specifications:

Easy Connection:

Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery from over charge, over discharge and prevent accidental battery explosion due to its extra high energy density. This protection circuit is specially designed for 22.2V Li-Ion Battery packs made of Li-ion and Li-Polymer cells.

• Keep 22.2V Li-Ion Batery pack from overcharge and overdischarge
• Limite the Max Cuurent to 8.0 A.
• Designed for 6 Cells Li-ion /Li-polymer Battery Packs
• Battery Protection
• Adopt SEIKO S8233 Protection IC
• Adopt IR IRF4906, FDS9926 MOSFET
• Dimension: 2.6" x 1.7" inch

PCB Indications

• B+ Battery (+)
• B- Battery (-)
• P+ OUT (+) /Load (+)
• C+ OUT (+) /Charge (+)
• P- OUT (-) /Charge(-) / Load(-)

Electric performance

• Overcharge Protection voltage for single cell: 4.235V+/-0.025V
• Over discharge Protection voltage for single cell: 2.30V+/-0.08V
• Over current detection Protection <=8A+/- 1A
• Supply current: MAX 600uA
• Short circuit Protection
• 0 V charge
• Protection circuitry Resistance: <= 10 milli-ohms

Specifications:

Easy Connection:

Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery packs from over charge, over discharge and accidental battery explosion due to its extra high energy density. This Protection Circuit Board is specially designed for 29.6V 8 Cells Li-Ion Battery packs made of Li-ion and Li-Polymer cells.

• Keep 29.6V Li-Ion Battery pack from overcharge and over discharge
• Keep 29.6V Li-Ion Battery pack 's discharging current lower than 10 A
• Short Cut Protection
• 8 Cells Li-ion / Li-polymer Battery Pack ( 29.6V up to 20 Ah)
• Battery Protection
• Dimension: 2.87" x 1.69 " inch

PCB Indications

• B+ Battery (+)
• B- Battery (-)
• P+ OUT (+) /Load (+)
• C+ OUT (+) /Charge (+)
• P- OUT (-) /Charge(-) / Load(-)

Electric performance

• Overcharge Protection voltage for single cell: 4.235V +/- 0.025V
• Overdischarge Protection voltage for single cell: 2.30V +/-0.08V
• Overcurrent detection Protection <= 10 A +/-1A
• Supply current: MAX 600uA
• Short circuit Protection
• 0 V charge
• Protection circuitry Resistance: <= 10 mohms

Specifications:

Easy Connection:

Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery packs from over charge, over discharge and accidental battery explosion due to its extra high energy density. This Protection Circuit Board is specially designed for 37 V Li-Ion Battery packs made of Li-ion and Li-Polymer cells.

• Keep 37V Li-Ion Battery pack from overcharge and over discharge
• Keep 37V Li-Ion Battery pack 's discharging current lower than 27 A
• Short Cut Protection
• 10 Cells Li-ion / Li-polymer Battery Pack ( 37V up to 27 Ah)
• Battery Protection
• Dimension: "2.4" x 3.25" inch

PCB Indications

• B+ Battery (+)
• B- Battery (-)
• P+ OUT (+) /Load (+)
• C+ OUT (+) /Charge (+)
• P- OUT (-) /Charge(-) / Load(-)

Electric performance

• Overcharge Protection voltage for single cell: 4.235V +/- 0.025V
• Over discharge Protection voltage for single cell: 2.30V +/-0.08V
• Over current detection Protection <= 27A~33A
• Supply current: MAX 300uA
• Short circuit Protection
• 0 V charge Protection
• Circuit Board Resistance: <= 6.67 milliOhms

Uniwill N223 Series Laptop Battery

Battery Specs:

• Condition: Brand New in bulk packaging.
• Warranty: 12 Months
• Type: Lithium-Ion
• Number of cells: 6
• Color: Black
• Capacity: 10.8v/4000mAh

Uniwill OEM Part Number: 223-3S4000-S1P1 223-3S4000-F1P1 23-UF4A00-0A.

Fits Laptop Models:

Systemax: Pursuit 4105 4110 Series.

UNIWILL: N223 N223II 223II 223II0.

Note: Battery life may vary depending on applications power management settings and features utilized. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power. After a period of time the battery will lose its ability to perform at maximum capacity and will need to be replaced. This is normal for all batteries.