Free Shipping - Best Combo: BC1HU Universal Smart Worldwide Fast Charger With 26-cell Package (8AA/8AAA/4C/4D/2 9V)

• Universal Fast and Smart Charger is designed for charging any 24V NiMH and NiCd Battery Packs. (20 Cells pack)
• 120-240V AC input for worldwide use.
• The charger can cut-off power Automatically by negative delta V IC when battery pack is fully charge.
• Two current levels, 0.6A and 1.2A, are selectable by a switch for either higher or lower capacity battery pack.
  • For battery pack between 3300mah and 500 mah, please use the low level switch -- charging rate: 0.6A
  • For battery pack over 3300 mAh, please use the high level switch -- charging rate: 1.2A
• Approximate, Charging time( hours) = Battery capacity ( Ah) / charging current ( A).
• If possible, always choose charging current in 0.6A to slow charging , which is good for battery and charger service life.
• Protection fuse for over current, short circuit & reverse polarity protection.
• Charging time can be estimated as the follow:

Charging time ( Hrs ) = 1.2xBattery capacity ( mAh) / Charging current ( 0.6A or 1.2A )

• One standard Tamiya male connector installed with the charger.
• One set connector adaptor from female tamiya to Clips is included for charging any battery packs.
• It is a very smart charger. Just plug it in and wait for the battery to get charge.
• The charger is designed for fast charging any 24V Nicd and NiMH battery packs. Ideal for 24V battery pack for E-bike, E- scooter and hunting light
• Dimension: 1.5"H X 2.5"W X 5.5"L.
• Weight: 0.6LB.

Features and Benefits

• Smart universal charger for Li-Ion and polymer Li-ion battery pack with capacity > 500mAh
  
• 4 Voltage selections at 3.6V, 7.2V, 10.8V and 14.4V
  
• Charges pack made of 1 to 4 cells
  
• Universal 100V - 240V AC input for worldwide power usage
  
• 500 mA constant charging current.
  
• Automatic charging stop when battery pack is fully charged , or when each cell 's voltage reaches 4.2V peak
  
• LED indication: Red means " In Charging " and Green means " Full " or "open circuits "
  
• Weight: 4.5 oz
  
• Dimension: 1.5" x 1" x 4"
  
  

Operation

• Select right voltage level for your pack.
  • For 3.6/3.7V 1-cell pack, set switch button 4.2 position on the charger
    
  • For 7.2/7.4V 2-cell pack, set switch button 8.4 position on the charger
  • For 3.6/3.7V 3-cell pack, set switch button 12.6 position on the charger
  • For 3.6/3.7V 4-cell pack, set switch button 16.8 position on the charger

Features and Benefits ---------Free Shipping Item

Battery Pack

• Tenergy High Capacity 9.6V 3000mAh Nickel Metal Hydride RC Battery Pack.
  
• Made with 8xSc 3000mAh high capacity and high power NiMH Batteries.
  
• Advanced NiMH battery technology, no battery memory effect.
  
• Easy operation, battery can be charged anytime without the need to fully discharge.
  
• Built with 14 gauds silicone wire and standard Tamiya Connector.
  
• Specially design for Airsoft guns for power intensity and long running time.
  
• High maximum 30 Amp discharge rate for fast vehicle start and maneuvers.
  
• Longer running time and easy operation than original NiCd battery pack.
• 6 months warranty.

Smart Universal Charger

• Best Charger for charging all RC Car, RC air and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V.
• Universal for for any NiMH /NiCd battery packs 7.2V 12V (6-10 Cells pack)
• Fast charger with current switch to select either, 0.9A and 1.8A. Deliver full charge within 1 2 hours.
  • Charging Current 0.9A for battery packs with capacity from 1100mAh 2200mAh. For 2000mAhpack, charging time is 1 hour.
  • Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours.
• Smart Charger:with automatic voltage detection
  • Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life.
  • Red LED will be on during charging.
  • Automatically charging ending with negative delta V.
• Worldwide usage with 120-240V AC
• Safety protection fuse for over current, short circuit & reverse polarity protection.

Accessories Included:

• 1 standard Tamiya Female connector and Fuse house with the smart battery charger.
• 1 connector adaptor from standard Male Tamiya to Mini Female.
• 1 set of clip adaptor with Male Tamiya connector on one end.
• 4 additional fuses

Technical Specifications

• Voltage: 8.4V
• Maximum Discharge Rate: 30A
• Connector Type: Standard Tamiya.
• Dimensions: Height 0.9"; Width 1.7"; Length 5.9"
• Weight: 14.5 Oz.