Auto Power Vacuum

Features and Benefits

• Universal AUTO to IN-FLIGHT Airline Adapter
  
• Compatible with all laptop auto adapters
  
• Use with power inverter to run electronics such as battery chargers, video games, portable DVD players, and cellular phone chargers.

Safe, Easy, No Hassle, and No Open Hoods or Jumper Cables needed!

Features and Benefits

• Plug this Auto Jumper into the cigarette lighter socket, and in 10 minutes you're ready to go!
  
• Powerful Ni-Cd battery (5Amps, 14.5V) inside has the power to let you start your vehicle from the warmth and safety of your car's interior!
  
• Unaffected by extreme weather conditions from -5F to 120F
  
• Recharge from your car battery through the cigarette lighter while driving 30 to 120 minutes or with the available AC adapter accessories
  
• Keep your car's clock, radio, alarm, and your car's computer memory while you change your auto battery
  
• Built-in trickle charge protection

Features and Benefits

• NIMH High Power 14.4V 3600mAh rechargeable battery
• Compatible with all Roomba FloorVac models.
• Longer running time - this high power, high capacity NIMH and has 10-15% more running time than OEM battery pack.
• 70 ^oC thermistor installed in the battery pack. Power will be cutt off if battery temperature beyond 70^oC during charging to prevent from over charge.
• Can be recharged up to 1000 cycles.
• 6" length wires is pre-installed for easy installation.
• For faster and safe charging, strongly suggest you use our New 12-16.8V Universal Smart charger, changing time is about 5-6 hours.
• The battery is designed for exactly replacing inside battery pack for IRobot Vacuum cleaner. e.g Roomba APS 4905 battery.
  - To replace inside battery, you need to take off 4 screws on the case, then put new battery with solid connection.
  - Please make sure polarity of battery pack. Red wire is always connect to positive
  
• TECHNICAL SPECIFICATIONS:
  - Votlage: 14.4V, made of 12 pcs High quality NiMH sub C cells. and packed by 2x6 configuration
  - Capacity: 3600mAh
  - Max. Discharging rate : 10 C at 33 A
  - Dimension: 136 mm L x 45 mm W x 45 mm H.
  - Weight: 38.5 Oz.
  
• Battery Installation Instruction:
  Step 1: Loose up all srews on the top cover of the Roomba Advanced Power System.
  Tool: You need a triangle screw driver to do so.
  Step 2: Open and remove the top cover from the power system, which may be glued.
  Tool: You may need a flat screw driver to open it carfuelly
  Step 3: Remove the old battery inside. Three are wires with metal contact connected inside. You can remove the wires by pulling up the contat or cut wires off.
  Take a note of the wire connections
  Step 4: Put new battery into the battery case and solder three wire back to metal contacts. Follow the note taken in Step 3 or the following details for re-wire:
  - Red wire : battery positive - metal contact near battery
  - Black wire: battery negative - metal contact near edge
  - White wire: temp sensore - metal contact on other side
  Step 5: Put back the cover
  Step 6: Screws on the cover

The Smart Mobile Power to Convert 12V DC to AC for your Electronics

FEATURES

• Converts 12V DC to AC
• Run & Charge 120 V Electronics in Your Vehicle
• Plug into any 12V Cigarette Lighter
• Auto Reset Short Circuit Protection
• Built-In Safety Features
• Input Short Circuit Protection/Overload Protection / Low Battery Alarm / Low Battery Shutdown

SPECIFICATIONS

* All Power Inverters have a Modified Sine Wave waveform (unless otherwise indicated), Overload Protection, Input Short-circuit Protection.