12V DC Peak Charger For 6.0V/ 7.2V/8.4V Rechargeable Battery Pack

Features and Benefits

• Smart universal charger for Li-Ion and polymer Li-ion battery pack with capacity > 500mAh
  
• 4 Voltage selections at 3.6V, 7.2V, 10.8V and 14.4V
  
• Charges pack made of 1 to 4 cells
  
• Universal 100V - 240V AC input for worldwide power usage
  
• 500 mA constant charging current.
  
• Automatic charging stop when battery pack is fully charged , or when each cell 's voltage reaches 4.2V peak
  
• LED indication: Red means " In Charging " and Green means " Full " or "open circuits "
  
• Weight: 4.5 oz
  
• Dimension: 1.5" x 1" x 4"
  
  

Operation

• Select right voltage level for your pack.
  • For 3.6/3.7V 1-cell pack, set switch button 4.2 position on the charger
    
  • For 7.2/7.4V 2-cell pack, set switch button 8.4 position on the charger
  • For 3.6/3.7V 3-cell pack, set switch button 12.6 position on the charger
  • For 3.6/3.7V 4-cell pack, set switch button 16.8 position on the charger

• Smart, build-in microprocessor automatically switch off when batteries are fully charged.
• Safe, build-in IC provides various protection, Thermal protection, Overcharge protection, Short-circuit protection, mechanical. and electrical protection against reversal polarity, and auto defective battery identification.
• Convenient, 12V car cigarette lighter plug for on the road charging.
• Compact ( 2.5 x 4 x 1 inch ), Light weight ( 5 oz only ), include charger and all accessories.
• Charge 1 to 2 RCR123A from 1.5 hours to 3 hours. Peak voltage of 3.0V Li-Ion will be 3.60V after fully charged.

• Worldwide usage. Auto AC power adjust from 100-240V.
• Smart, build-in microprocessor automatically switch off when batteries are fully charged.
• Safe, build-in IC provides various protection, Thermal protection, Overcharge protection, Short-circuit protection, mechanical. and electrical protection against reversal polarity, and auto defective battery identification.
• Convenient, 12V car cigarette lighter plug for on the road charging.
• Compact ( 2.5 x 4 x 1 inch ), Light weight ( 5 oz only ), include charger and all accessories.
• Charge 1 to 2 RCR123A from 1.5 hours to 3 hours. Peak voltage of 3.0V Li-Ion will be 3.60V after fully charged.

RCR123A Features

• Rechargeable CR123A Li-Ion Batteries with 3.0V working voltage and 900mAh capacity.
• Tenergy RCR123A can be recharged up to 1000 times. 1 RCR123A Li-ion = 1000 CR123A Primary Cells
• Replace the most of CR123A primary Lithium battery for a digital cameras and flashlight
• Modified Voltage to achieve 3.2v at full voltage; once loaded, cell voltage drops to 3.0v.
• Internal Voltage Regulators.
• Dimension: 16 D x 32 H mm.
• Weight: 17 g or 0.6 Oz.

Features and Benefit

• High quality 14.8 V Li-Ion rechargeable battery pack
  
• Made of Four 2000mAh cylindrical 18650 cells with PCB and poly switch for full protection
  
• Light weight and higher energy density than any rechargeable battery
  
• No memory effect and rechargeable
  
• Longer storage life than NiMH battery
  
• You can build 14.8V/4.0Ah Li-Ion battery pack by connecting two or three PCB ready battery module in parallel .
  
• Built-in IC chip will prevent battery pack from over charge and over discharge and prolongs battery life
  
• Perfect for building 14.8V battery pack for bike lighting, RC toy, robots, laptop and DVD external battery.
  
  

Technical Specifications

Cautions

• Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.
  
• Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.
  
• We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteries
  
• Strongly suggest that you use our smart Li-Ion battery charger to recharge the battery pack
  
• Never use conventional DC adapter to charge the battery module) We are NOT responsible for any damage that is caused by the misuse of the Li-Ion Battery
  
• Please don't make parallel connection with more than two modules to avoid uneven charge.