Results for 'rechargeable battery chargers'

Features and Benefits

• Input 110VAC output: 12VDC 800mA.
• Smart IC Chip to individually charges 1 to 10 pcs of AA and AAA batteries.
• Intelligent microprocessor controlled.with minus delta V (-delta V) cut-off function.
• Use constant current pulse charging system.
• Each charging group is individual programmable in its function.
• Ni-MH and Ni-Cd batteries can be charge at the same time.
• Recharges batteries in single or group.
• The Unique Discharge Feature---100% protection for New NiMH or even old NiCD Batteries.
• Automatic charge and discharge function.
• Special mechanical protection against wrong polarity.
• Build-in maximum charging timer control for overcharge protection.
• Individual LED to indicate proper charge, discharge, and trickle charge.
• Charging time of empty batteries: AAA rated capacity (180mAh-950mAh); charging time 1 to 4 hours.
• AA rated capacity (500mAh-2600mAh); charging time 3 to 16 hours.
• Each in a retail box. Dimensions: 51.5 x 35.5 x 37.5 cm

• Universal Fast and Smart Charger is designed for charging any 24V NiMH and NiCd Battery Packs. (20 Cells pack)
• 120-240V AC input for worldwide use.
• The charger can cut-off power Automatically by negative delta V IC when battery pack is fully charge.
• Two current levels, 0.6A and 1.2A, are selectable by a switch for either higher or lower capacity battery pack.
  • For battery pack between 3300mah and 500 mah, please use the low level switch -- charging rate: 0.6A
  • For battery pack over 3300 mAh, please use the high level switch -- charging rate: 1.2A
• Approximate, Charging time( hours) = Battery capacity ( Ah) / charging current ( A).
• If possible, always choose charging current in 0.6A to slow charging , which is good for battery and charger service life.
• Protection fuse for over current, short circuit & reverse polarity protection.
• Charging time can be estimated as the follow:

Charging time ( Hrs ) = 1.2xBattery capacity ( mAh) / Charging current ( 0.6A or 1.2A )

• One standard Tamiya male connector installed with the charger.
• One set connector adaptor from female tamiya to Clips is included for charging any battery packs.
• It is a very smart charger. Just plug it in and wait for the battery to get charge.
• The charger is designed for fast charging any 24V Nicd and NiMH battery packs. Ideal for 24V battery pack for E-bike, E- scooter and hunting light
• Dimension: 1.5"H X 2.5"W X 5.5"L.
• Weight: 0.6LB.

Charger

• Quick charger for 1-4 pcs size AA, AAA NiMH and NiCd batteries
• Standard charge for 1 or 2 pcs 9V cells
  
• With battery type selection for NiMH or NiCd AA, AAA batteries
  
• Recharges batteries in single or group
  
• Automatic Charging current selection for AA, AAA and 9V cells
  
• Dual color LED indication
  • Red color to indicate charging mode
  • Green color to indicate ready/trickle charge mode
• Built-in IC timer control for over-charge protection
  
• Charging Time
  • NiCd AA/AAA: 4 hours by timer control
    
  • NiMH AA/AAA: 7 hours by timer control
    
  • NiCd/NiMH 9V: 10 hours by timer control
• Packing: each in a gift box.

Battery Features

• High quality 9V rectangular size rechargebale Nickle Metal Hydride (NiMH) battery
  
• Exact replacement for standard 9V rectangular size battery
  
• Provides very long use time per charge with this high 200 mAh capacity
  
• Advanced Ni-MH technology means much longer use life per charge than the ordinary rechargeables
  
• Designed for enhancd performance for high drain applications such as R/C controller, detector, transmitter and other portable high drain digital electronics
  
• Can be recharged for up to 1000 times, providing big saving by replacing hundreds of expensive throw away 9V rectangular size batteries.
  
• Convenient operation without memory effect. Can be charged anytime.
  
• Battery tested based on International Electronic Commission (IEC) standard to ensure capacity, quality and life time

Specifications

• Model: V-2833
• Input: 12 VDC, 500mA
• Output: AA - 2.8 /5.6V, 700 mA
• Output: AAA - 2.8/5.6V, 350 mA

Features

• Charges 2 or 4 AA & AAA batteries at a time
• Charges NiMH or NiCd batteries (separately)
• Automatic charging current selection for AA or AAA
• Equipped with LED lamp to indicate proper charging
• Adjustable battery contact plate

Charging Time

Features and Benefits

• Best Charger for charging all NiMH/NiVD battery packs 12V,13.2V,14.4V,15.6V,16.8V
  
• Universal for for any NiMH /NiCd battery packs 12V - 16.8V (10-14 NiMH/NiCD Cells packs)
  
• Fast charger with current switch to select either, 0.7A and 1.4A. Deliver full charge within 1 - 2 hours.
  
• Charging Current 0.7A for battery packs with capacity from 1100mAh -2200mAh. For 2000mAhpack, charging time is 1 hour.
  
• Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours.
  
• Smart Charger:with automatic voltage detection.
  
• Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life.
  
• Red LED will be on during charging.
  
• Automatically charging ending with negative delta V.
  
• Worldwide usage with 120-240V AC
  
• Safety protection fuse for over current, short circuit & reverse polarity protection.

Accessories Included

• 1 standard Tamiya Female connector and Fuse house with the smart battery charger.
  
• 1 connector adaptor from standard Male Tamiya to Mini Female.
  
• 1 set of clip adaptor with Male Tamiya connector on one end.
  
• 3 additional fuses
  
  

Smart Charger Specification

• FOR 12V-16.8V NI-MH/NI-CD Battery Packs (10-14 Cells in series )
  
• Input: AC100-240V
  
• Output: 12V-16.8V 0.7or 1.4A

Operation Instruction

• Connect battery pack to output connector and plug AC power source.
  
• Make sure battery polarity is connected correctly (Red wire is positive)
  
• Charger will detect battery voltage automatically, Red LED will be on during charging
  
• When battery is fully charged, current will reduce to trickle charging at 50mA,Green LED will be on
  
• Battery will be charged at 0.7A or 1.4A constant current,
  
• Approx, Charging time is about 2 hrs for 3000mAh battery,1.5hr for 1800mAh battery.
  
• Don't charger battery pack with voltage less than 12V or Voltage bigger than 12V and Capacity less than 1100mAh.
  
• Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage.
  
  

Caution

• The charger is designed for indoor use only.
  
• The Charger should be horizontally positioned and work in well ventilated condition, avoid wet and keep it away from inflammable explosive goods.
  
• Don't cover the charger when charging, ambient temperature shall not be more than 40^oC
  
• Don't touch the plug.
  
• Cut off the power supply before connect or disconnect the charger with batteries.
  
• Don't try to disassemble the charger, High voltage inside, danger!

Features and Benefits ---------Free Shipping Item

Battery Pack

• Tenergy High Capacity 9.6V 3000mAh Nickel Metal Hydride RC Battery Pack.
  
• Made with 8xSc 3000mAh high capacity and high power NiMH Batteries.
  
• Advanced NiMH battery technology, no battery memory effect.
  
• Easy operation, battery can be charged anytime without the need to fully discharge.
  
• Built with 14 gauds silicone wire and standard Tamiya Connector.
  
• Specially design for Airsoft guns for power intensity and long running time.
  
• High maximum 30 Amp discharge rate for fast vehicle start and maneuvers.
  
• Longer running time and easy operation than original NiCd battery pack.
• 6 months warranty.

Smart Universal Charger

• Best Charger for charging all RC Car, RC air and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V.
• Universal for for any NiMH /NiCd battery packs 7.2V 12V (6-10 Cells pack)
• Fast charger with current switch to select either, 0.9A and 1.8A. Deliver full charge within 1 2 hours.
  • Charging Current 0.9A for battery packs with capacity from 1100mAh 2200mAh. For 2000mAhpack, charging time is 1 hour.
  • Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours.
• Smart Charger:with automatic voltage detection
  • Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life.
  • Red LED will be on during charging.
  • Automatically charging ending with negative delta V.
• Worldwide usage with 120-240V AC
• Safety protection fuse for over current, short circuit & reverse polarity protection.

Accessories Included:

• 1 standard Tamiya Female connector and Fuse house with the smart battery charger.
• 1 connector adaptor from standard Male Tamiya to Mini Female.
• 1 set of clip adaptor with Male Tamiya connector on one end.
• 4 additional fuses

Technical Specifications

• Voltage: 8.4V
• Maximum Discharge Rate: 30A
• Connector Type: Standard Tamiya.
• Dimensions: Height 0.9"; Width 1.7"; Length 5.9"
• Weight: 14.5 Oz.

Features and Benefits

• Best Charger for charging all RC Car, RC air and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V.
  
• Universal for for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells pack)
  
• Fast charger with current switch to select either, 0.9A and 1.8A. Deliver full charge within 1 - 2 hours.
  
• Charging Current 0.9A for battery packs with capacity from 1100mAh -2200mAh. For 2000mAhpack, charging time is 1 hour.
  
• Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours.
  
• Smart Charger:with automatic voltage detection.
  
• Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life.
  
• Red LED will be on during charging.
  
• Automatically charging ending with negative delta V.
  
• Worldwide usage with 120-240V AC
  
• Safety protection fuse for over current, short circuit & reverse polarity protection.

Accessories Included

• 1 standard Tamiya Female connector and Fuse house with the smart battery charger.
  
• 1 connector adaptor from standard Male Tamiya to Mini Female.
  
• 1 set of clip adaptor with Male Tamiya connector on one end.
  
• 4 additional fuses
  

Smart Charger Specification

• FOR 6V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERY
  
• Input: AC100-240V
  
• Output: 6-12V 0.9or1.8A

Operation Instruction

• Connect battery pack to output connector and plug AC power source.
  
• Make sure battery polarity is connected correctly (Red wire is positive)
  
• Charger will detect battery voltage automatically, Red LED will be on during charging
  
• When battery is fully charged, current will reduce to trickle charging at 50mA,Green LED will be on
  
• Battery will be charged at 0.9A or 1.8A constant current,
  
• Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery.
  
• The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun.
  
• Don't charger battery pack with voltage less than 6V or Voltage bigger than 12V and Capacity smaller than1100mAh.
  
• Battery pack must be made by high drain current cell.
  
• Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage.
  
  

Caution

• The charger is designed for indoor use only.
  
• The Charger should be horizontally positioned and work in well ventilated condition, avoid wet and keep it away from inflammable explosive goods.
  
• Don't cover the charger when charging, ambient temperature shall not be more than 40^oC
  
• Don't touch the plug.
  
• Cut off the power supply before connect or disconnect the charger with batteries.
  
• Don't try to disassemble the charger, High voltage inside, danger!