Results for 'Universal Charger'

Features and Benefits

• Universal AUTO to IN-FLIGHT Airline Adapter
  
• Compatible with all laptop auto adapters
  
• Use with power inverter to run electronics such as battery chargers, video games, portable DVD players, and cellular phone chargers.

Features and Benefits

• NIMH High Power 14.4V 3600mAh rechargeable battery
• Compatible with all Roomba FloorVac models.
• Longer running time - this high power, high capacity NIMH and has 10-15% more running time than OEM battery pack.
• 70 ^oC thermistor installed in the battery pack. Power will be cutt off if battery temperature beyond 70^oC during charging to prevent from over charge.
• Can be recharged up to 1000 cycles.
• 6" length wires is pre-installed for easy installation.
• For faster and safe charging, strongly suggest you use our New 12-16.8V Universal Smart charger, changing time is about 5-6 hours.
• The battery is designed for exactly replacing inside battery pack for IRobot Vacuum cleaner. e.g Roomba APS 4905 battery.
  - To replace inside battery, you need to take off 4 screws on the case, then put new battery with solid connection.
  - Please make sure polarity of battery pack. Red wire is always connect to positive
  
• TECHNICAL SPECIFICATIONS:
  - Votlage: 14.4V, made of 12 pcs High quality NiMH sub C cells. and packed by 2x6 configuration
  - Capacity: 3600mAh
  - Max. Discharging rate : 10 C at 33 A
  - Dimension: 136 mm L x 45 mm W x 45 mm H.
  - Weight: 38.5 Oz.
  
• Battery Installation Instruction:
  Step 1: Loose up all srews on the top cover of the Roomba Advanced Power System.
  Tool: You need a triangle screw driver to do so.
  Step 2: Open and remove the top cover from the power system, which may be glued.
  Tool: You may need a flat screw driver to open it carfuelly
  Step 3: Remove the old battery inside. Three are wires with metal contact connected inside. You can remove the wires by pulling up the contat or cut wires off.
  Take a note of the wire connections
  Step 4: Put new battery into the battery case and solder three wire back to metal contacts. Follow the note taken in Step 3 or the following details for re-wire:
  - Red wire : battery positive - metal contact near battery
  - Black wire: battery negative - metal contact near edge
  - White wire: temp sensore - metal contact on other side
  Step 5: Put back the cover
  Step 6: Screws on the cover

Features and Benefits

• Recharges 1 or 2 pcs 9V block (PP3/6F22) NiMH/NiCd rechargeable batteries
  
• Equipped with LED lamp to indicate proper charging
  
• Charging time: 10 hours
  
• Packing: Each in a clamshell pack

Charger

• Recharges 1 or 2 pcs 9V block (PP3/6F22) NiMH/NiCd rechargeable batteries
• Equipped with LED lamp to indicate proper charging
• Charging time: 10 hours
• Packing: Each in a clamshell pack

Battery Features

• High quality 9V rectangular size rechargeabale Nickel Metal Hydride (NiMH) battery Ultra high capacity of 250mAh
• Exact replacement for standard 9V rectangular size battery
• Provides very long use time per charge with this high 250 mAh capacity
• Advanced Ni-MH technology means much longer use life per charge than the ordinary rechargeables
• Designed for enhanced performance for high drain applications such as: R/C controller, detector, transmitter, and other portable high drain digital electronics
• Can be recharged for up to 1000 times, providing big saving by replacing hundreds of expensive throw away 9V rectangular size batteries.
• Convenient operation without memory effect. Can be charged anytime.
• Can be rapidly charged with our chargers model BC1HU, V1199B, V3969A1, V228.
• Dimensions: (H x L x W): 48mm x 26mm x 16mm.
• Weight: 0.1lbs per cell
• 6 months warranty.
• Battery tested based on International Electronic Commission (IEC) standard to ensure capacity, quality and life time

Features and Benefits

• Protection Circuit Board for 14.4V Li-ion and Li-polymer battery pack
  
• Designed for 14.4V Li-ion or Li-Polymer battery
  
• Prevent 14.4V Li-ion or Li-polymer battery from over-charging, over-discharging and from discharging current more than 5A.
  
  

Connection Instruction

Port # Connection
B+ To battery (+)
B- To battery (-)
P- Output (+) r Charger (+)
P+ Output (+) r Charger (+)
B1- To battery 3 (+) and battery 4 (-)
B2- To battery 2 (+) and battery 3 (-)
B3- To battery 1 (+) and battery 2 (-)

Technical Specifications