Results for 'Power Chair Gel Battrey'

• Universal Fast and Smart Charger is designed for charging any 24V NiMH and NiCd Battery Packs. (20 Cells pack)
• 120-240V AC input for worldwide use.
• The charger can cut-off power Automatically by negative delta V IC when battery pack is fully charge.
• Two current levels, 0.6A and 1.2A, are selectable by a switch for either higher or lower capacity battery pack.
  • For battery pack between 3300mah and 500 mah, please use the low level switch -- charging rate: 0.6A
  • For battery pack over 3300 mAh, please use the high level switch -- charging rate: 1.2A
• Approximate, Charging time( hours) = Battery capacity ( Ah) / charging current ( A).
• If possible, always choose charging current in 0.6A to slow charging , which is good for battery and charger service life.
• Protection fuse for over current, short circuit & reverse polarity protection.
• Charging time can be estimated as the follow:

Charging time ( Hrs ) = 1.2xBattery capacity ( mAh) / Charging current ( 0.6A or 1.2A )

• One standard Tamiya male connector installed with the charger.
• One set connector adaptor from female tamiya to Clips is included for charging any battery packs.
• It is a very smart charger. Just plug it in and wait for the battery to get charge.
• The charger is designed for fast charging any 24V Nicd and NiMH battery packs. Ideal for 24V battery pack for E-bike, E- scooter and hunting light
• Dimension: 1.5"H X 2.5"W X 5.5"L.
• Weight: 0.6LB.

Features and Benefits

Features and Benefits

• Powered by 1 Watt Luxeon
  
• With mounting bracket to be used on bicycle
  
• Durable, Water Resistant housing for enduring dire weather or outdoor conditions
  
• Proprietary DC-DC Regulator technology enables Maximum Light Output through the Entire Battery Life
  
• 3 1.5V AAA Alkaline Batteries and a Nylon Pouch and Carrying Strap included
  
  

Specifications

Features and Benefits

• Lithium Ion 18650 cylindrical rechargeable batteries
  
• 3.7V 2200mAh high capacity
  
• Higher energy density and lower weight than other types rechargeable batteries
  
• Manufactured under ISO9001-2000 to assure quality
  
• Battery tested based on International Electrotechnical Commission (IEC) standard to ensure capacity, quality and life time
  
  

Applications

• Building Laptop Battery
  
• Building portable power device needing high energy density and low weight
  
  

Cautions

• Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.
  
• Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.
  
• We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteries
  
  

Product Specifications

• Capacity* Nominal 2200 mAh, Minimum 2150 mAh
  
• Dimensions:
  Diameter 18+/10.2 mm
  Height 68+/- 0.2mm
  
• Weight (Typical) Approx. 46 g yes
  
• Nominal Voltage: Average 3.7V
  
• Cut-off Voltage: 3.0V
  
• Internal Impedance: less or equal to 180 milliohm (with PTC)
  
• Cycle Performance: 90% of initial capacity at 400 cycles
  
• Cycle life: > 500 cycles
  
• Charge: Current = 0.5C mA Voltage = 4.2 V End Current = 0.01 mA
  
• Discharge: Current = 0.5C mA End Voltage = 3.0V
  
• Max. Charging current: 1.5C ma
  
• Max. Discharging current 1.5C ma (for continuous discharge)

FEATURES AND BENEFITS

High Capacity 7.2V 2100mAh NiCd RC Battery Pack.
- Compatible and designed specifically for high performance with all 7.2V vehichles: Tamiya, Traxxas, HPI, LOSI, Kyosho, Associated, etc.
- Manufactured with 6 matched Sc 2100mAh high capacity and high power NiCd Batteries for optimized RC performance.
- Built in Standard Tamiya Connector.
- Specially designed for RC Racing vehicles for fast vehicle start and long running time.
- High current discharge rate for fast vehicle start and maneuvers.
- Long running time and easy operation

TECHNICAL SPECIFICATIONS
- Voltage: 7.2V
- Capacity: 2100mAh
- Maixmum Discharge Rate: 30A
- Connector Type: Standard Tamiya.
- Dimension: Height 0.95"; Width 1.80"; Length 5.3"
- Weight: 10 Oz.

Features and Benefits

HP Pavilion N5000/Pavilion XH/OmniBook XE3 Series Laptop Battery Li-Ion 11.1v/5400mAH

• Condition: Brand New. Generic Brand. Made in Taiwan.
• Warranty: 12 Months
• Type: Lithium Ion
• Color: Zinfandel Blue
• Dimensions: 180 x 82 x 20 mm [LxWxH]
• Capacity: 11.1v/5400mAH
• Highest quality Japan NEC battery cells
• 100% compatible with original OEM manufacturer
• Average run time: 2.5 hours

Compatible HP Battery Part Numbers: F2024A F2024B

Fits HP Laptop Models:

Features and Benefits

• Lithium Ion 18650 cylindrical rechargeable battery with tab;
  
• 3.7V 2000mAh high capacity
  
• Higher energy density and lower weight than other types rechargeable batteries
  
• Manufactured under ISO9001-2000 to assure quality
  
• Internal PCB protects against under and over charging- low voltage 2.8, high voltage 4.2.
  
• Battery tested based on International Electrotechnical Commission (IEC) standard to ensure capacity, quality and life time
  

Applications

• Building Laptop Battery
  
• Building portable power device needing high energy density and low weight
  

Cautions

• Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.
  
• Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.
  
• We are not responsible for any damage caused by misuse or mishandling of theses Li-Ion batteries
  
  

Product Specifications

• Capacity* Nominal 2000 mAh, Minimum 1950 mAh
  
• Dimensions:
  Diameter 18+/- 0.2 mm
  Height 68+/- 0.2mm
  
• Weight (Typical) Approx. 46 g yes
  
• Nominal Voltage: Average 3.7V
  
• Cut-off Voltage: 3.0V
  
• Internal Impedance: less or equal to 180 milliohm (with PTC)
  
• Cycle Performance: 90% of initial capacity at 400 cycles
  
• Cycle life: > 500 cycles
  
• Charge: Current = 0.5C mA Voltage = 4.2 V End Current = 0.01 mA
  
• Discharge: Current = 0.5C mA End Voltage = 3.0V
  
• Max. Charging current: 1.5C ma
  
• Max. Discharging current 1.5C ma (for continuous discharge)

Features and Benefits

• Lithium Ion 18650 cylindrical rechargeable battery with tab;
  
• 3.7V 2000mAh high capacity
  
• Higher energy density and lower weight than other types rechargeable batteries
  
• Manufactured under ISO9001-2000 to assure quality
  
• Internal PCB protects against under and over charging- low voltage 2.8, high voltage 4.2.
  
• Battery tested based on International Electrotechnical Commission (IEC) standard to ensure capacity, quality and life time
  

Applications

• Building Laptop Battery
  
• Building portable power device needing high energy density and low weight
  

Cautions

• Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.
  
• Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.
  
• We are not responsible for any damage caused by misuse or mishandling of theses Li-Ion batteries
  
  

Product Specifications

• Capacity* Nominal 2000 mAh, Minimum 1950 mAh
  
• Dimensions:
  Diameter 18+/- 0.2 mm
  Height 68+/- 0.2mm
  
• Weight (Typical) Approx. 46 g yes
  
• Nominal Voltage: Average 3.7V
  
• Cut-off Voltage: 3.0V
  
• Internal Impedance: less or equal to 180 milliohm (with PTC)
  
• Cycle Performance: 90% of initial capacity at 400 cycles
  
• Cycle life: > 500 cycles
  
• Charge: Current = 0.5C mA Voltage = 4.2 V End Current = 0.01 mA
  
• Discharge: Current = 0.5C mA End Voltage = 3.0V
  
• Max. Charging current: 1.5C ma
  
• Max. Discharging current 1.5C ma (for continuous discharge)