Results for 'Rechargeable D Batteries'

Features and Benefits

• 24 V 3000 mAh NiMH battery pack
  
• Ideal for DC Power Supply for scooter, robot, E-Bikes and any 24V DC device with less than 10A discharging current requirement.
  
• Made with 20 Sub C size 3000mAh TENERGY high power NiMH Batteries.
  
• Extra battery pack protection with high temperature and high strength PVC wrap
• 6 months warranty.
  

Technical Specifications

• Voltage: 24V
  
• Battery: 20 NIMH Sub C cells
  
• Connector Type: Standard Tamiya.
  
• Dimensions: Height 1.75"; Width 3.5"; Length 4.5"
  
• Battery Configuration: 4 rowa of 5 Sub C cells
  
• Weight: 2.6 Lb.

Features

• Universal Smart Charger is designed for any NiMH/NiCd battery pack from 2.4V- 7.2V with capacity > 600mAh
• 100-240V AC input for world wide power support.
• Ideal for 4.8V - 7.2V NiMH battery packs of RC flight, RC car, Bikelighting and rechargeable flashlight.
• It can alse be use as a battery charger module for any DC device
• It is a very smart charger. Just plug it in and wait for battery to charge
  • Automatically detect battery pack's voltage, Red LED will be on during charging.
  • Automatically cut-off by negative delta V when battery pack is fully charge.
• When battery is fully charge, LED will change from Red to Orange color.
• Two current levels 0.6A and 1.2A, are selectable by a switch
  • For battery pack less than or equal to 1200mAh, please switch charging rate to 0.6A
  • For battery pack over 1200 mah, please switch charging rate to 1.2 A
• The fuse is installed in power line for protection of over current, short circuit & reverse polarity protection. It is easy to replace. Two extra fuse is included .
• Charging time is about 4 hrs for 4500 mAh battery pack, 1.5 hrs for 1800 mAh, and 1hr for 1200 mAh.
• One standard Tamiya male connector is installed with the charger.
• One set of Clip adapter with a female tamiya connector included for charging any battery packs.
• One connector adaptor from standard Female Tamiya to Male Mini. Tamiya for charging RC air battery packs.

Cautions:

• The charger is designed for fast charging NiCD and NiMH battery packs from 2.4V to 7.2V battery. with capacity > 600 mAh.
  • Please don't use the charger for low capacity battery pack (600mah).
  • Please don't charge battery pack with voltage < 2.4V or voltage > 7.2V
  Strongly suggest to use Tenergy brand high drain rate battery pack. We are not responsible for any damage cause by charging other brand battery using this charger. Please make sure polarities between charger and battery pack are match before charging the battery. Otherwise wrong polarity may burn the fuse and damage the charger. The charger is designed for indoor use only. The charger should be horizontally position and work in well ventilated condition. Avoid it being wet and keep it away from flammable/ explosive goods. Cut off the power supply before connecting or disconnecting the charger with batteries.
• Don't try to disassemble the charger because of the high voltage inside, danger!!!

• Input 110VAC output: 12VDC 800mA.
• Smart IC Chip to indivudually charges 1 to 10 pcs of AA and AAA batteries.
• Intelligent microprocessor controlled.with minus delta V (-delta V) cut-off function.
• Use constant current pulse charging system.
• Each charging group is individual programmable in its function.
• Ni-MH and Ni-CD batteries can be charge at the same time.
• Recharges batteries in single or group.
• The Unique Discharge Feature---100% protection for New NiMH or even old NiCD Batteries.
• Automatic charge and discharge function.
• Special mechanical protection against wrong polarity.
• Build-in maximum charging timer control for overcharge protection.
• Individual LED to indicate proper charge, discharge, and trickle charge.
• Charging time of empty batteries: AAA rated capacity (180mAh-950mAh); charging time 1 to 4 hours.
• AA rated capacity (500mAh-2600mAh); charging time 3 to 16 hours.
• Each in a retail box. Dimensions: 51.5 x 35.5 x 37.5 cm

NiMH 2300mAH batteries

- High quality Ultra High Capacity AA Size rechargebale Nickle Metal Hydride (Ni-MH) battery, top of line.
- Exact replacement for standard AA size battery in all the devices
- Provides ultra long use time per charge with this ultra high 2300 mAh capacity
- Advanced Ni-MH technology means twice longer use life per charge than the ordinary rechargeables
- Designed for enhancd performance for high drain applications such as digital cameras, CD players, portable audio devices, hand held games, 2-way radios, PDAs, and other portable high drain digital electronics
- Can be recharged for up to 1000 times, providing big saving by replacing hundreds of throw away AA batteries.
- Convenient operation without memory effect. Can be charged anytime.
- Can be rapidly charged with any qucik charger, smart chargers, plug in charger or universal chargers
- Battery tested based on International Electrotechnical Commission (IEC) standard to ensure capacity, quality and life time

Features and Benefits

• High power CR123A Lithium Ion Batteries
  
• Can be used for many applications: Photo cameras, Flashlights, light meters, and many other photo equipments.
  
• Ultra long shelf life of 10 years with minimal natural discharge.
  
• Ultra high energy density and last 3-5 times longer than ordinary alkaline batteries in high current drain devices like digital cameras.
  
• Fast Flash performance with a consistent and very short recycle time.
  
• This highly performance CR123A can replace the following models: CR123, DL123A, K123A, EL123AP, VL123A, 5018LC, and CR17345.
  
• Warning: Can Not Be Recharged!

Technical Specifications

• Voltage:3V
  
• Capacity: 1300mAH
  
• Dimension: Height x Diameter: 16 x 32 mm
  
• Weight: 0.56 Oz