Results for 'NiMh'

• Input 110VAC output: 12VDC 800mA.
• Smart IC Chip to indivudually charges 1 to 10 pcs of AA and AAA batteries.
• Intelligent microprocessor controlled.with minus delta V (-delta V) cut-off function.
• Use constant current pulse charging system.
• Each charging group is individual programmable in its function.
• Ni-MH and Ni-Cd batteries can be charge at the same time.
• Recharges batteries in single or group.
• The Unique Discharge Feature---100% protection for New NiMH or even old NiCD Batteries.
• Automatic charge and discharge function.
• Special mechanical protection against wrong polarity.
• Build-in maximum charging timer control for overcharge protection.
• Individual LED to indicate proper charge, discharge, and trickle charge.
• Charging time of empty batteries: AAA rated capacity (180mAh-950mAh); charging time 1 to 4 hours.
• AA rated capacity (500mAh-2600mAh); charging time 3 to 16 hours.
• Each in a retail box. Dimensions: 51.5 x 35.5 x 37.5 cm
  

High Capacity Rechargeable Batteries

• High quality AA Size rechargeable Nickel Metal Hydride (Ni-MH) battery, top of line.
• Exact replacement for standard AA size battery in all the devices
• Provides ultra long use time per charge with this ultra high 2600 mAh capacity
• Advanced Ni-MH technology means twice longer use life per charge than the ordinary rechargeables
• Designed for enhanced performance for high drain applications such as digital cameras, CD players, portable audio devices, hand held games, 2-way radios, PDAs, and other portable high drain digital electronics
• Can be recharged for up to 1000 times, providing big saving by replacing hundreds of throw away AA batteries.
• Convenient operation without memory effect. Can be charged anytime.
• Can be rapidly charged with any quick charger, smart chargers, plug in charger or universal chargers
• Battery tested based on International Electronic Commission (IEC) standard to ensure capacity, quality and life time

Features and Benefits

• Square 9.6V 2000mAh high capacity battery pack
  
• Battery pack made with 8 pcs of AA 2000mah NiMH Batteries and Hi-tec connector.
  
• Specially designed for Airtronic @ Hitec RC air transmitter.
  
• Rapidly charging is capable at < 1C rate.
• 6 months warranty.

Technical Specifications

• Voltage: 9.6V
  
• Connector Type: Hightec
  
• Dimensions: Height 1.1"; Width 1.1"; Length 3.9 "
  
• Weight:: 8 Oz.

Features and Benefits

• Best Charger for charging all RC Car, RC air and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V.
  
• Universal for for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells pack)
  
• Fast charger with current switch to select either, 0.9A and 1.8A. Deliver full charge within 1 - 2 hours.
  
• Charging Current 0.9A for battery packs with capacity from 1100mAh -2200mAh. For 2000mAhpack, charging time is 1 hour.
  
• Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours.
  
• Smart Charger:with automatic voltage detection.
  
• Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life.
  
• Red LED will be on during charging.
  
• Automatically charging ending with negative delta V.
  
• Worldwide usage with 120-240V AC
  
• Safety protection fuse for over current, short circuit & reverse polarity protection.

Accessories Included

• 1 standard Tamiya Female connector and Fuse house with the smart battery charger.
  
• 1 connector adaptor from standard Male Tamiya to Mini Female.
  
• 1 set of clip adaptor with Male Tamiya connector on one end.
  
• 4 additional fuses
  

Smart Charger Specification

• FOR 6V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERY
  
• Input: AC100-240V
  
• Output: 6-12V 0.9or1.8A

Operation Instruction

• Connect battery pack to output connector and plug AC power source.
  
• Make sure battery polarity is connected correctly (Red wire is positive)
  
• Charger will detect battery voltage automatically, Red LED will be on during charging
  
• When battery is fully charged, current will reduce to trickle charging at 50mA,Green LED will be on
  
• Battery will be charged at 0.9A or 1.8A constant current,
  
• Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery.
  
• The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun.
  
• Don't charger battery pack with voltage less than 6V or Voltage bigger than 12V and Capacity smaller than1100mAh.
  
• Battery pack must be made by high drain current cell.
  
• Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage.
  
  

Caution

• The charger is designed for indoor use only.
  
• The Charger should be horizontally positioned and work in well ventilated condition, avoid wet and keep it away from inflammable explosive goods.
  
• Don't cover the charger when charging, ambient temperature shall not be more than 40^oC
  
• Don't touch the plug.
  
• Cut off the power supply before connect or disconnect the charger with batteries.
  
• Don't try to disassemble the charger, High voltage inside, danger!