Results for '9 Volt Charger'

Features and Benefits

• Best Charger for charging all NiMH/NiVD battery packs 12V,13.2V,14.4V,15.6V,16.8V
  
• Universal for for any NiMH /NiCd battery packs 12V - 16.8V (10-14 NiMH/NiCD Cells packs)
  
• Fast charger with current switch to select either, 0.7A and 1.4A. Deliver full charge within 1 - 2 hours.
  
• Charging Current 0.7A for battery packs with capacity from 1100mAh -2200mAh. For 2000mAhpack, charging time is 1 hour.
  
• Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours.
  
• Smart Charger:with automatic voltage detection.
  
• Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life.
  
• Red LED will be on during charging.
  
• Automatically charging ending with negative delta V.
  
• Worldwide usage with 120-240V AC
  
• Safety protection fuse for over current, short circuit & reverse polarity protection.

Accessories Included

• 1 standard Tamiya Female connector and Fuse house with the smart battery charger.
  
• 1 connector adaptor from standard Male Tamiya to Mini Female.
  
• 1 set of clip adaptor with Male Tamiya connector on one end.
  
• 3 additional fuses
  
  

Smart Charger Specification

• FOR 12V-16.8V NI-MH/NI-CD Battery Packs (10-14 Cells in series )
  
• Input: AC100-240V
  
• Output: 12V-16.8V 0.7or 1.4A

Operation Instruction

• Connect battery pack to output connector and plug AC power source.
  
• Make sure battery polarity is connected correctly (Red wire is positive)
  
• Charger will detect battery voltage automatically, Red LED will be on during charging
  
• When battery is fully charged, current will reduce to trickle charging at 50mA,Green LED will be on
  
• Battery will be charged at 0.7A or 1.4A constant current,
  
• Approx, Charging time is about 2 hrs for 3000mAh battery,1.5hr for 1800mAh battery.
  
• Don't charger battery pack with voltage less than 12V or Voltage bigger than 12V and Capacity less than 1100mAh.
  
• Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage.
  
  

Caution

• The charger is designed for indoor use only.
  
• The Charger should be horizontally positioned and work in well ventilated condition, avoid wet and keep it away from inflammable explosive goods.
  
• Don't cover the charger when charging, ambient temperature shall not be more than 40^oC
  
• Don't touch the plug.
  
• Cut off the power supply before connect or disconnect the charger with batteries.
  
• Don't try to disassemble the charger, High voltage inside, danger!

Features and Benefits

• Best Charger for charging all RC Car, RC air and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V.
  
• Universal for for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells pack)
  
• Fast charger with current switch to select either, 0.9A and 1.8A. Deliver full charge within 1 - 2 hours.
  
• Charging Current 0.9A for battery packs with capacity from 1100mAh -2200mAh. For 2000mAhpack, charging time is 1 hour.
  
• Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours.
  
• Smart Charger:with automatic voltage detection.
  
• Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life.
  
• Red LED will be on during charging.
  
• Automatically charging ending with negative delta V.
  
• Worldwide usage with 120-240V AC
  
• Safety protection fuse for over current, short circuit & reverse polarity protection.

Accessories Included

• 1 standard Tamiya Female connector and Fuse house with the smart battery charger.
  
• 1 connector adaptor from standard Male Tamiya to Mini Female.
  
• 1 set of clip adaptor with Male Tamiya connector on one end.
  
• 4 additional fuses
  

Smart Charger Specification

• FOR 6V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERY
  
• Input: AC100-240V
  
• Output: 6-12V 0.9or1.8A

Operation Instruction

• Connect battery pack to output connector and plug AC power source.
  
• Make sure battery polarity is connected correctly (Red wire is positive)
  
• Charger will detect battery voltage automatically, Red LED will be on during charging
  
• When battery is fully charged, current will reduce to trickle charging at 50mA,Green LED will be on
  
• Battery will be charged at 0.9A or 1.8A constant current,
  
• Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery.
  
• The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun.
  
• Don't charger battery pack with voltage less than 6V or Voltage bigger than 12V and Capacity smaller than1100mAh.
  
• Battery pack must be made by high drain current cell.
  
• Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage.
  
  

Caution

• The charger is designed for indoor use only.
  
• The Charger should be horizontally positioned and work in well ventilated condition, avoid wet and keep it away from inflammable explosive goods.
  
• Don't cover the charger when charging, ambient temperature shall not be more than 40^oC
  
• Don't touch the plug.
  
• Cut off the power supply before connect or disconnect the charger with batteries.
  
• Don't try to disassemble the charger, High voltage inside, danger!

Features and Benefits
- Compact Battery Pack Charger
- Input: AC 110V, Wall Plug
- Output: DC 15V, 400mA charge.
- Built in Tamiya connector
- Reliable 15V DC Power Supply
- Charges 12-15V NiMH and NiCd Battery Pack
- Individual white box packed.

Features and Benefits

• Specially designed for rechargeable batteries used in digital and audio products
• Recharge 1-8 pcs AA and AAA batteries at a time
• 8 independent channels with individual LED display for proper charge, discharge & trickle charge
• Intelligent microprocessor controlled
• With negative delta V cut-off function
• Ni-MH & Ni-Cd batteries can be mixed to charge at the same time
• Temperature sensors to avoid the battery from being damaged by over-heating
• With mechanical & electrical protection against wrong polarity
• With maximum charging timer control for overcharge protection
• With 12V car charging function

More Detailed Info, Click Here

Features and Benefits
- Compact Battery Pack Charger
- Input: AC 110V, Wall Plug
- Output: DC 15V, 400mA charge.
- Built in Tamiya connector
- Reliable 15V DC Power Supply
- Charges 12-15V NiMH and NiCd Battery Pack
- Individual white box packed.

Features and Benefits

• 1Mill Candle Power Spotlight
  
• Shines over a mile away
  
• Sealed lead-acid battery
  
• Recharge by cigarette lighter DC charger (included)and AC charger for
  
• household outlets (optional)
  
• Adjustable handle and stand for different needs
  
• 55W halogen bulb with large 5" diameter reflector
  
• Useful for camping, vehicle repairing,Emergencies
  
• Easy Grip and waterproof