Results for 'Charger'

Features and Benefits

• LG Lithium Ion 18650 cylindrical rechargeable cylindrical battery provides higher energy density with optimized electrodes design.
• Ultra Higher Capacity: 3.7V 2400mAh high capacity, Highest on the market
• Higher energy density, higher capacity and lower weight than other types rechargeable batteries
• Manufactured under ISO90012000 to assure quality
• Improved Battery Safety
• Free from Leakage of Liquid Electrolyte
• Low Battery Internal Impedance
• High Capacity at Low Temperature (10C or below)

Applications:

• Building laptop battery, digital camcorder, digital camera, ebook, etc.
• Building portable power device needing high energy density and low weight Please download 18650LG2400mah

Product Specifications:

Charger: Current = 1050mA, Voltage = 4.2 V, End Current = 50 mA (CCV)
Discharge: Current = 460 mA, End Voltage = 3.0 V

Cautions:

• Use special caution when working with Liion cells, they are very sensitive to charging characteristics and may explode if mishandled.
• Make sure user has enough knowledge on LiIon rechargeable batteries in charging, discharging and assembly before use.
• We are not responsible for any damage caused by misuse or mishandling of theses LiIon batteries
  

Features and Benefits

• LG Lithium Ion 18650 cylindrical rechargeable cylindrical battery provides higher energy density with optimized electrodes design.
• Ultra Higher Capacity: 3.7V 2400mAh high capacity, Highest on the market
• Higher energy density, higher capacity and lower weight than other types rechargeable batteries
• Manufactured under ISO90012000 to assure quality
• Improved Battery Safety
• Free from Leakage of Liquid Electrolyte
• Low Battery Internal Impedance
• High Capacity at Low Temperature (10C or below)

Applications:

• Building laptop battery, digital camcorder, digital camera, ebook, etc.
• Building portable power device needing high energy density and low weight Please download 18650LG2400mah

Product Specifications:

Charger: Current = 1050mA, Voltage = 4.2 V, End Current = 50 mA (CCV)
Discharge: Current = 460 mA, End Voltage = 3.0 V

Cautions:

• Use special caution when working with Liion cells, they are very sensitive to charging characteristics and may explode if mishandled.
• Make sure user has enough knowledge on LiIon rechargeable batteries in charging, discharging and assembly before use.
• We are not responsible for any damage caused by misuse or mishandling of theses LiIon batteries
  

Features and Benefits

• NIMH High Power 14.4V 3600mAh rechargeable battery
• Compatible with all Roomba FloorVac models.
• Longer running time - this high power, high capacity NIMH and has 10-15% more running time than OEM battery pack.
• 70 ^oC thermistor installed in the battery pack. Power will be cutt off if battery temperature beyond 70^oC during charging to prevent from over charge.
• Can be recharged up to 1000 cycles.
• 6" length wires is pre-installed for easy installation.
• For faster and safe charging, strongly suggest you use our New 12-16.8V Universal Smart charger, changing time is about 5-6 hours.
• The battery is designed for exactly replacing inside battery pack for IRobot Vacuum cleaner. e.g Roomba APS 4905 battery.
  - To replace inside battery, you need to take off 4 screws on the case, then put new battery with solid connection.
  - Please make sure polarity of battery pack. Red wire is always connect to positive
  
• TECHNICAL SPECIFICATIONS:
  - Votlage: 14.4V, made of 12 pcs High quality NiMH sub C cells. and packed by 2x6 configuration
  - Capacity: 3600mAh
  - Max. Discharging rate : 10 C at 33 A
  - Dimension: 136 mm L x 45 mm W x 45 mm H.
  - Weight: 38.5 Oz.
  
• Battery Installation Instruction:
  Step 1: Loose up all srews on the top cover of the Roomba Advanced Power System.
  Tool: You need a triangle screw driver to do so.
  Step 2: Open and remove the top cover from the power system, which may be glued.
  Tool: You may need a flat screw driver to open it carfuelly
  Step 3: Remove the old battery inside. Three are wires with metal contact connected inside. You can remove the wires by pulling up the contat or cut wires off.
  Take a note of the wire connections
  Step 4: Put new battery into the battery case and solder three wire back to metal contacts. Follow the note taken in Step 3 or the following details for re-wire:
  - Red wire : battery positive - metal contact near battery
  - Black wire: battery negative - metal contact near edge
  - White wire: temp sensore - metal contact on other side
  Step 5: Put back the cover
  Step 6: Screws on the cover

4 in 1 Extreme Power

Auto Jump-Starter + Air Compressor + AC Power Source + DC Power Source
----------------------------
Features and Benefits

• Multifunctional for your car, home, leisure and in emergency situations.
  
• Charge the power depot in your home and take it on the road for any occasion!
  
• The built-in fluorescent lamp is detachable and powered by the supplied adapter to give you light whenever and wherever needed.
  
• Included also is a set of Jumper Cables in case you need to Jump-start your car when no other cars are available.
  

* Recharging of these products requires AC adapter provided by the product's respective companies.