Results for 'Battery Pack'

Features and Benefits

• 2 cell Lithium Polymer 2100mAh battery pack.
• 15C continuous discharge rate of 31 amps with 42 amp bursts in accordance with our "Real Flight Rating" method.
• Maximum charge rate 2.1 Amps.
• Dimension: 32mm x 17mm x 100mm
• Weight: 119 grams
• This pack is ideal for the 1/18 scale Team Associated truck.
• Please see our "Real Flight Rating" method that describes more specific use of "burst" discharge rates with our Li-Poly cells.

Features and Benefits

• 3 cell Lithium Polymer 2100mAh battery pack.
• 15C continuous discharge rate of 31 amps with 42 amp bursts in accordance with our "Real Flight Rating" method.
• Maximum charge rate 2.1 Amps.
• Dimensions: 32mm x 28mm x 100mm
• Weight: 173 grams
• This pack is ideal for the T-Rex helicopter.
• Please see our "Real Flight Rating" method that describes more specific use of "burst" discharge rates with our Li-Poly cells.

Features and Benefits

• 4 cell Lithium Polymer 2100mAh battery pack.
• 15C continuous discharge rate of 31 amps with 42 amp bursts in accordance with our "Real Flight Rating" method.
• Maximum charge rate 2.1 Amps.
• Dimensions: 32mm x 35mm x 100mm
• Weight: 229 grams
• This pack is ideal for the T-Rex helicopter.
• Please see our "Real Flight Rating" method that describes more specific use of "burst" discharge rates with our Li-Poly cells.

Features and Benefits

• Square 9.6V 2000mAh high capacity battery pack
  
• Battery pack made with 8 pcs of AA 2000mah NiMH Batteries and Hi-tec connector.
  
• Specially designed for Airtronic @ Hitec RC air transmitter.
  
• Rapidly charging is capable at < 1C rate.
• 6 months warranty.

Technical Specifications

• Voltage: 9.6V
  
• Connector Type: Hightec
  
• Dimensions: Height 1.1"; Width 1.1"; Length 3.9 "
  
• Weight:: 8 Oz.

Features and Benefits

• 24V 5000 mAh NiCd battery pack
  
• Ideal for DC Power Supply for Solar Panel, robot, E-Bikes and any 24V DC device with less than 5A discharging current requirement
  
• Made with 20D size 5000 mAh TENERGY high power NiCd Batteries
  
• Extra battery pack protection with high temperature and high strength PVC wrap
  

Technical Specifications

• Voltage: 9.6V
  
• Battery: NiCd
  
• Connector Type: Standard Tamiya
  
• Dimensions: Height 2.375"; Width 3.5"; Length 9"
  
• Battery Configuration: 7x6x7
  
• Weight: 4.5 Lb.

Features

• Universal Smart Charger is designed for any NiMH/NiCd battery pack from 2.4V- 7.2V with capacity > 600mAh
• 100-240V AC input for world wide power support.
• Ideal for 4.8V - 7.2V NiMH battery packs of RC flight, RC car, Bikelighting and rechargeable flashlight.
• It can alse be use as a battery charger module for any DC device
• It is a very smart charger. Just plug it in and wait for battery to charge
  • Automatically detect battery pack's voltage, Red LED will be on during charging.
  • Automatically cut-off by negative delta V when battery pack is fully charge.
• When battery is fully charge, LED will change from Red to Orange color.
• Two current levels 0.6A and 1.2A, are selectable by a switch
  • For battery pack less than or equal to 1200mAh, please switch charging rate to 0.6A
  • For battery pack over 1200 mah, please switch charging rate to 1.2 A
• The fuse is installed in power line for protection of over current, short circuit & reverse polarity protection. It is easy to replace. Two extra fuse is included .
• Charging time is about 4 hrs for 4500 mAh battery pack, 1.5 hrs for 1800 mAh, and 1hr for 1200 mAh.
• One standard Tamiya male connector is installed with the charger.
• One set of Clip adapter with a female tamiya connector included for charging any battery packs.
• One connector adaptor from standard Female Tamiya to Male Mini. Tamiya for charging RC air battery packs.

Cautions:

• The charger is designed for fast charging NiCD and NiMH battery packs from 2.4V to 7.2V battery. with capacity > 600 mAh.
  • Please don't use the charger for low capacity battery pack (600mah).
  • Please don't charge battery pack with voltage < 2.4V or voltage > 7.2V
  Strongly suggest to use Tenergy brand high drain rate battery pack. We are not responsible for any damage cause by charging other brand battery using this charger. Please make sure polarities between charger and battery pack are match before charging the battery. Otherwise wrong polarity may burn the fuse and damage the charger. The charger is designed for indoor use only. The charger should be horizontally position and work in well ventilated condition. Avoid it being wet and keep it away from flammable/ explosive goods. Cut off the power supply before connecting or disconnecting the charger with batteries.
• Don't try to disassemble the charger because of the high voltage inside, danger!!!

Features and Benefits

• Perfect replacement for Airtronics receiver battery pack or for other 4.8 V power packs
  
• 4.8 V, 3000 mAh high capacity NiMH battery pack
  
• Built in Hightec connector.
  
• More than twice the running time compares to the original NiCd battery pack.
  
• No Memory Effect, easy operation. Can be charged any time. Fast charging up.
  
• Made with  4 pcs of high quality NiMH Sc cells
• 6 months warranty

Technical Specifications

• Voltage: 4.8V
  
• Capacity: 3000mAh
  
• Dimension: Height 0.9"; Width 1.8"; Length 3.5"
  
• Weight : 9 Oz.

Features and Benefits

• Perfect replacement for Airtronics receiver battery pack or for other 4.8 V power packs
  
• 4.8 V, 3000 mAh high capacity NiMH battery pack
  
• Built in Hightec connector.
  
• More than twice the running time compares to the original NiCd battery pack.
  
• No Memory Effect, easy operation. Can be charged any time. Fast charging up.
  
• Made with  4 pcs of high quality NiMH Sc cells
• 6 months warranty

Technical Specifications

• Voltage: 4.8V
  
• Capacity: 3000mAh
  
• Dimension: Height 0.9"; Width 1.8"; Length 3.5"
  
• Weight : 9 Oz.

• 6V 2000 mAh NiMH Battery Pack
• made of high quality matched NiMH 5 x AA cells with pre-wire Tabs.
• Dimensions: 70 x 15 x 50 mm
• Made with AA 2000mAh

• 7.2V 1100 mAh NiMH Battery Pack
• made of 6 x 2/3A 1100 mAh NiMH matched cells.
• With small mini Tamiya male connector.
• High performance with high capacity.
• Dimension: 50L x 35W x 30H mm
• 6 months warranty.

Features and Benefits

• 2 cell Lithium Polymer 800mAh battery pack.
• 8C continuous discharge rate of 10 amps with 15 amp bursts in accordance with our "Real Flight Rating" method.
• Top quality cells with moderate discharge rates.
• Maximum charge rate 1.25 Amps.
• All 8C packs have separate charging/balancing connectors.
• This pack comes with the JST discharge connector.
• Dimensions: 14mm x 34mm x 48mm
• Weight: 46 grams
• Please see our "Real Flight Rating" method that describes more specific use of "burst" discharge rates with our Li-Poly cells.

Features and Benefits
- Compact Battery Pack Charger
- Input: AC 110V, Wall Plug
- Output: DC 15V, 400mA charge.
- Built in Tamiya connector
- Reliable 15V DC Power Supply
- Charges 12-15V NiMH and NiCd Battery Pack
- Individual white box packed.