T-2299 Universal Smart Fast Charger With 26-cell Package (8AA/8AAA/4C/4D/2 9V)-New!!

• Universal Fast and Smart Charger is designed for charging any 24V NiMH and NiCd Battery Packs. (20 Cells pack)
• 120-240V AC input for worldwide use.
• The charger can cut-off power Automatically by negative delta V IC when battery pack is fully charge.
• Two current levels, 0.6A and 1.2A, are selectable by a switch for either higher or lower capacity battery pack.
  • For battery pack between 3300mah and 500 mah, please use the low level switch -- charging rate: 0.6A
  • For battery pack over 3300 mAh, please use the high level switch -- charging rate: 1.2A
• Approximate, Charging time( hours) = Battery capacity ( Ah) / charging current ( A).
• If possible, always choose charging current in 0.6A to slow charging , which is good for battery and charger service life.
• Protection fuse for over current, short circuit & reverse polarity protection.
• Charging time can be estimated as the follow:

Charging time ( Hrs ) = 1.2xBattery capacity ( mAh) / Charging current ( 0.6A or 1.2A )

• One standard Tamiya male connector installed with the charger.
• One set connector adaptor from female tamiya to Clips is included for charging any battery packs.
• It is a very smart charger. Just plug it in and wait for the battery to get charge.
• The charger is designed for fast charging any 24V Nicd and NiMH battery packs. Ideal for 24V battery pack for E-bike, E- scooter and hunting light
• Dimension: 1.5"H X 2.5"W X 5.5"L.
• Weight: 0.6LB.

Features and Benefits

• Best Charger for charging all NiMH/NiVD battery packs 12V,13.2V,14.4V,15.6V,16.8V
  
• Universal for for any NiMH /NiCd battery packs 12V - 16.8V (10-14 NiMH/NiCD Cells packs)
  
• Fast charger with current switch to select either, 0.7A and 1.4A. Deliver full charge within 1 - 2 hours.
  
• Charging Current 0.7A for battery packs with capacity from 1100mAh -2200mAh. For 2000mAhpack, charging time is 1 hour.
  
• Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours.
  
• Smart Charger:with automatic voltage detection.
  
• Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life.
  
• Red LED will be on during charging.
  
• Automatically charging ending with negative delta V.
  
• Worldwide usage with 120-240V AC
  
• Safety protection fuse for over current, short circuit & reverse polarity protection.

Accessories Included

• 1 standard Tamiya Female connector and Fuse house with the smart battery charger.
  
• 1 connector adaptor from standard Male Tamiya to Mini Female.
  
• 1 set of clip adaptor with Male Tamiya connector on one end.
  
• 3 additional fuses
  
  

Smart Charger Specification

• FOR 12V-16.8V NI-MH/NI-CD Battery Packs (10-14 Cells in series )
  
• Input: AC100-240V
  
• Output: 12V-16.8V 0.7or 1.4A

Operation Instruction

• Connect battery pack to output connector and plug AC power source.
  
• Make sure battery polarity is connected correctly (Red wire is positive)
  
• Charger will detect battery voltage automatically, Red LED will be on during charging
  
• When battery is fully charged, current will reduce to trickle charging at 50mA,Green LED will be on
  
• Battery will be charged at 0.7A or 1.4A constant current,
  
• Approx, Charging time is about 2 hrs for 3000mAh battery,1.5hr for 1800mAh battery.
  
• Don't charger battery pack with voltage less than 12V or Voltage bigger than 12V and Capacity less than 1100mAh.
  
• Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage.
  
  

Caution

• The charger is designed for indoor use only.
  
• The Charger should be horizontally positioned and work in well ventilated condition, avoid wet and keep it away from inflammable explosive goods.
  
• Don't cover the charger when charging, ambient temperature shall not be more than 40^oC
  
• Don't touch the plug.
  
• Cut off the power supply before connect or disconnect the charger with batteries.
  
• Don't try to disassemble the charger, High voltage inside, danger!

Features and Benefits

• Smart universal charger for Li-Ion and polymer Li-ion battery pack with capacity > 500mAh
  
• 4 Voltage selections at 3.6V, 7.2V, 10.8V and 14.4V
  
• Charges pack made of 1 to 4 cells
  
• Universal 100V - 240V AC input for worldwide power usage
  
• 500 mA constant charging current.
  
• Automatic charging stop when battery pack is fully charged , or when each cell 's voltage reaches 4.2V peak
  
• LED indication: Red means " In Charging " and Green means " Full " or "open circuits "
  
• Weight: 4.5 oz
  
• Dimension: 1.5" x 1" x 4"
  
  

Operation

• Select right voltage level for your pack.
  • For 3.6/3.7V 1-cell pack, set switch button 4.2 position on the charger
    
  • For 7.2/7.4V 2-cell pack, set switch button 8.4 position on the charger
  • For 3.6/3.7V 3-cell pack, set switch button 12.6 position on the charger
  • For 3.6/3.7V 4-cell pack, set switch button 16.8 position on the charger