Results for 'Battery Pack'

• This 2500mah Lithium Polymer pack fits all Futaba, Hitec, Airtronics and JR Transmitters that use the "Square" pack.
• It comes with an "RCY" type connector that is likely to work with the connector on your transmitter.
• If it doesn't mate up, you can cut the connector off of your existing battery and splice it to the wires on our pack.
• Airtronics radios cannot be charged using the charging receptacle located on the outside of the radio.
• Maximum discharge rate 10 Amps.
• Maximum charge rate 2.5 Amps/charge at 1 Amp for longer battery life.
• Dimensions: 30mm x 30mm x 100mm

Features and Benefits

• Square 9.6V 2000mAh high capacity battery pack
  
• Battery pack made with 8 pcs of AA 2000mah NiMH Batteries and Hi-tec connector.
  
• Specially designed for Airtronic @ Hitec RC air transmitter.
  
• Rapidly charging is capable at < 1C rate.
• 6 months warranty.

Technical Specifications

• Voltage: 9.6V
  
• Connector Type: Hightec
  
• Dimensions: Height 1.1"; Width 1.1"; Length 3.9 "
  
• Weight:: 8 Oz.

Features and Benefits
- Compact Battery Pack Charger
- Input: AC 110V, 260mA, Wall Plug
- Output: DC 24V, 500mA charge.
- Built in Tamiya connector
- Reliable 24V DC Power Supply
- Charges 24V NiMH and NiCd Battery Pack
- Individual white box packed.

• Universal Fast and Smart Charger is designed for charging any 24V NiMH and NiCd Battery Packs. (20 Cells pack)
• 120-240V AC input for worldwide use.
• The charger can cut-off power Automatically by negative delta V IC when battery pack is fully charge.
• Two current levels, 0.6A and 1.2A, are selectable by a switch for either higher or lower capacity battery pack.
  • For battery pack between 3300mah and 500 mah, please use the low level switch -- charging rate: 0.6A
  • For battery pack over 3300 mAh, please use the high level switch -- charging rate: 1.2A
• Approximate, Charging time( hours) = Battery capacity ( Ah) / charging current ( A).
• If possible, always choose charging current in 0.6A to slow charging , which is good for battery and charger service life.
• Protection fuse for over current, short circuit & reverse polarity protection.
• Charging time can be estimated as the follow:

Charging time ( Hrs ) = 1.2xBattery capacity ( mAh) / Charging current ( 0.6A or 1.2A )

• One standard Tamiya male connector installed with the charger.
• One set connector adaptor from female tamiya to Clips is included for charging any battery packs.
• It is a very smart charger. Just plug it in and wait for the battery to get charge.
• The charger is designed for fast charging any 24V Nicd and NiMH battery packs. Ideal for 24V battery pack for E-bike, E- scooter and hunting light
• Dimension: 1.5"H X 2.5"W X 5.5"L.
• Weight: 0.6LB.

Features and Benefits

• 4.8 V 900 mAh NiCd battery pack for RC cars and planes
• Made with 4xAA 900mAh TENERGY high power NiCd Batteries.
  
• Delivery long run time with powerful performance
• Built in Mini Tamiya Connector.
• Low cost battery pack replacement.
  
• Ideal receiver battery for most RC Cars.

Technical Specifications

• Voltage: 4.8V
  
• Battery: NiCd
  
• Connector Type: Standard Tania.
  
• Dimensions: Height 0.6"; Width 2"; Length 2.2"
  
• Weight: 4 Oz.