Results for 'Polymer Li Ion Battery 3 6V'

Cautions

• Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.
  
• Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.
  
• We are not responsible for any damage caused by misuse or mishandling of these Polymer Li-Ion batteries
  

Lithium Polymer Battery for Palm PDA

• Brand new and 100% compatible with 1 Year Warranty
  
• Type: Lithium Polymer,
  
• Benefit: High capcity and no memory effect.
  
• Voltage: 3.7V
  
• Capacity: 1450mAh
  
• Color: Blue
  
• Weight: 0.3 lb

This battery fits Palm PDA models

Palm IIIC

This battery replaces Palm battery models

Palm 170-0737

Cautions

• Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.
  
• Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.
  
• We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteries
  

- Brand new and 100% compatible with 1 Year Warranty
- Type: Lithium Polymer,
- Benefit: High capcity and no memory effect.
- Voltage: 3.7V
- Capacity: 850mAh
- Color: Grey
- Weight: 0.3 lb

This battery fits Palm PDA models: Palm M515

This battery replaces Palm battery models: Palm S3261

Specifications:

Easy Connection:

Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery from over charge, over discharge and prevent accidental battery explosion due to its extra high energy density. This protection circuit is specially designed for 22.2V Li-Ion Battery packs made of Li-ion and Li-Polymer cells.

• Keep 22.2V Li-Ion Batery pack from overcharge and overdischarge
• Limite the Max Cuurent to 8.0 A.
• Designed for 6 Cells Li-ion /Li-polymer Battery Packs
• Battery Protection
• Adopt SEIKO S8233 Protection IC
• Adopt IR IRF4906, FDS9926 MOSFET
• Dimension: 2.6" x 1.7" inch

PCB Indications

• B+ Battery (+)
• B- Battery (-)
• P+ OUT (+) /Load (+)
• C+ OUT (+) /Charge (+)
• P- OUT (-) /Charge(-) / Load(-)

Electric performance

• Overcharge Protection voltage for single cell: 4.235V+/-0.025V
• Over discharge Protection voltage for single cell: 2.30V+/-0.08V
• Over current detection Protection <=8A+/- 1A
• Supply current: MAX 600uA
• Short circuit Protection
• 0 V charge
• Protection circuitry Resistance: <= 10 milli-ohms

• Intelligent charger designed for all types of 14.4V (4 cells) Li-Ion Battery packs including Polymer Li-Ion and Cylindral Li-Ion.
• Worldwide input AC power from 110V --- 240V.
• 1500 mA (1.5A ) constant charging current for faster charging, save your much more time.
• Charging time for 4000mAh battery pack is about 2.6 Hrs. ( Please use it to charge Li-Ion battery with capacity > 1500mAh)
• Built in IC to cut off power automatically when battery is fully charge.
• Red Lead will show Battery in charging and Green LED shows full. (LED also is full without battery).
• Two pins male connector is for connecting to Li-Ion battery pack
• One 5' cable with male connector is included , which allow you connect it to a battery pack and fits with the smart charger.
• Dimension: 2.5" L x 1.25" W x 1" H.
• Compact size and lightweight. It is perfect to charger our 14.4V Li-Ion battery pack module and 14.4V Li-Ion battery pack for bike-lighting

Warning:

• Only charge Li-Ion battery pack with capacity more than 1500 mAh. Don't use the charger for lower capacity Li-Ion battery pack.
• Only charge Li-Ion battery pack with voltage 14.8V ( 4 cell pack ) . Don't use the charger for Lower voltage battery pack, whcih may cayse battery exploded
• We are not responsible for any damage baused by user and miss use.

Features and Benefits

• This is a 2 cell Ultra High Discharge Lithium Polymer 700mAh 20C battery pack not to exceed a continuous discharge rate of 14 amps.
• These packs have been thoroughly tested at a 20C continuous discharge rate and perform as advertise.
• Dimensions: 6mm x 36mm x 55mm
• Weight: 50 grams

Features and Benefits

• 2 cell Lithium Polymer 2000mAh battery pack.
• 8C continuous discharge rate not to exceed 16 amps.
• Top quality cells with moderate discharge rates.
• Maximum charge rate 2 Amps.
• Comes with Dean's Ultra discharge connector.
• Dimensions: 14.5mm x 34mm x 95mm
• Weight: 106 grams

Features and Benefits

• 3 cell Lithium Polymer 1650mAh battery pack.
• 8C continuous discharge rate not to exceed 13 amps.
• Top quality cells with moderate discharge rates.
• Maximum charge rate 1.5 Amps.
• Comes with Dean's Ultra discharge connector.
• Dimensions: 20mm x 34mm x 95mm
• Weight: 127 grams

Features and Benefits

• 2 cell Lithium Polymer 1650mAh battery pack.
• 8C continuous discharge rate not to exceed 13 amps.
• Top quality cells with moderate discharge rates.
• Maximum charge rate 1.5 Amps.
• Comes with Dean's Ultra discharge connector.
• Dimensions: 15mm x 34mm x 83mm
• Weight: 87 grams

Features and Benefits

• This is a 2 cell Ultra High Discharge Lithium Polymer 1000mAh 20C battery pack not to exceed a continuous discharge rate of 20 amps.
• These packs have been thoroughly tested at a 20C continuous discharge rate and perform as advertise.
• Maximum burst of 25 Amps for 5 seconds is ok for every 30 seconds.
• Maximum charge rate 1.0 Amps.
• Dimensions: 16.5 mm x 37mm x 70mm
• Weight: 69 grams