Results for 'Polymer Li Ion Battery 3 6V'

Features and Benefits

• Protection Circuit Board for 3.6V Li-ion and Li-polymer battery pack
  
• Designed for 3.6V Li-ion or Li-Polymer battery
  
• Prevent 3.6V Li-ion or Li-polymer battery from over-charging, over-discharging and from discharging current more than 3.5A.
  

Because of the very high energy density, Li-Ion Battery pack must be connected to a protection circuit module to prevent accidental battery explosion caused by over-charging or over-discharging.

Features and Benefits

• Protection Circuit Board for 3.6V Li-ion and Li-polymer battery pack
  
• Designed for 3.6V Li-ion or Li-Polymer battery
  
• Prevent 3.6V Li-ion or Li-polymer battery from over-charging, over-discharging and from discharging current more than 3.5A.
  

Because of the very high energy density, Li-Ion Battery pack must be connected to a protection circuit module to prevent accidental battery explosion caused by over-charging or over-discahrging.

Specifications:

Easy Connection:

Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery from over charge, over discharge and prevent accidental battery explosion due to its extra high energy density. This protection circuit board is specially designed for 18.5v Li-Ion Battery packs made of Li-ion and Li-Polymer cells.

• Keep 18.5V Li-Ion Battery packs from overcharge and over discharge
• Limit the Max discharge Current to 8.0 A.
• Designed for 5 Cells?€?Li-ion /Li-polymer Battery Packs
• Li-ion/Polymer Battery Protection
• SEIKO S8233 Protection IC
• IR IRF4906, FDS9926 MOSFET
• Dimension: 3.55" x 0.8"inch

PCB Indications

• B+ Battery (+)
• B- Battery (-)
• P+ OUT (+) /Load (+)
• C+ OUT (+) /Charge (+)
• P- OUT (-) /Charge(-) / Load(-)

Electric performance

• Overcharge Protection voltage for single cell:4.235V +/- 0.025V
• Over discharge Protection voltage for single cell:2.30V+/-0.08V
• Over current detection Protection:<=8 A +/-1A
• Supply current:MAX 600uA
• Short circuit Protection
• 0 V charge
• Protection circuit Resistance: <=10 mill-oHms

Prismatic Polymer Li-Ion Battery, 3.7V, 875mAh (383562) for RC Car and RC Plane or Micro Device

Cautions

• Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.
  
• Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.
  
• We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteries
  

Prismatic Polymer Li-Ion Battery, 3.7V, 430mAh for RC Car and RC Plane or Micro Device

Cautions

• Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.
  
• Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.
  
• We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteries
  

Prismatic Polymer Li-Ion Battery, 3.7V, 2700mAh for Lighting and Laptop

Cautions

• Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.
  
• Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.
  
• We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteries
  

Features and Benefits

• Protection Circuit Board for 14.4V Li-ion and Li-polymer battery pack
  
• Designed for 14.4V Li-ion or Li-Polymer battery
  
• Prevent 14.4V Li-ion or Li-polymer battery from over-charging, over-discharging and from discharging current more than 5A.
  
  

Connection Instruction

Port # Connection
B+ To battery (+)
B- To battery (-)
P- Output (+) r Charger (+)
P+ Output (+) r Charger (+)
B1- To battery 3 (+) and battery 4 (-)
B2- To battery 2 (+) and battery 3 (-)
B3- To battery 1 (+) and battery 2 (-)

Technical Specifications

Overcharge Protection voltage	4.35V +/- 0.025V per single cell
Overdischarge Protection voltage	2.4V +/-0.08V per single cell
Overcurrent detection Protection	6.5 A (max) at 16.8V
Continuous working current	3.0A (max) at 14.4V
Over-charge protection response time	1 second (typical)
Over-discharge protection response time	0.1 second (typical)
Current consumption	Review this product + Add to my saved list			$9.65 Buy Now
	7.4 Volt - 1650mAh 8C Li-Poly Pack Li Poly Features and Benefits 2 cell Lithium Polymer 1650mAh battery pack. 8C continuous discharge rate not to exceed 13 amps. Top quality cells with moderate discharge rates. Maximum charge rate 1.5 Amps. Comes with Dean's Ultra discharge connector. Dimensions: 15mm x 34mm x 83mm Weight: 87 grams Review this product + Add to my saved list			$19.00 Buy Now
	Protection Circuit Module ( PCB ) For 11.1V Li-Ion Battery Pack (3 Cells With 6.5A Limit ) Li Ion Features and Benefits Protection Circuit Board for 11.1V Li-ion and Li-polymer battery pack Designed for 11.1V Li-ion or Li-Polymer battery Prevent 11.1V Li-ion or Li-polymer battery from over-charging, over-discharging and from discharging current more than 5A. Connection Instruction Port # Connection B+ To battery (+) B- To battery (-) P- Output (+) r Charger (+) P+ Output (+) r Charger (+) B1- To battery 2 (+) and battery 3 (-) B2- To battery 1 (+) and battery 2 (-) Technical Specifications Overcharge Protection voltage 4.35V +/- 0.025V per single cell Overdischarge Protection voltage 2.4V +/-0.08V per single cell Overcurrent detection Protection 6.5 A (max) at 12.6V Continuous working current 3.0A (max) at 10.8V Over-charge protection response time 1 second (typical) Over-discharge protection response time 0.1 second (typical) Current consumption 30uA (max) Idle current 0.1uA (max) Internal resistance 130 m-ohms 0V charging capability Yes Working temperature -40 ~ 85 C Dimensions Length 50+/-0.3mm Width 16+/-0.2mm Thickness 3.5mm (max) Application Notes Do not subject the PCB to input voltage over 20V. INput voltage over 20V will damage the PCB Please use the compatible charger for your battery pack. Special attention to your input and output voltage, current to avoid PCB damage When mixing over-charged batteries and over-discharged batteries together, PCB will be in dual state of over-charging and over-discharging. In this situation, charging and dis-charging are both disabled Internal static charge protection circuit built into the PCB. But not subject the PCB to high static charge to avoid damage. Without the written agreement from us, please don't use this PCB for application in medical instruments, emergence devices, auto and airspace vehicles or other device that might have impact on human body. Because of the very high energy density, Li-Ion Battery pack must be connected to a protection circuit module to prevent accidental battery explosion caused by over-charging or over-discharging. Review this product + Add to my saved list			$9.75 Buy Now
	3.7 Volt - 500mAh 10C Li-Poly Cell Li Poly Features and Benefits Single cell Lithium Polymer 500mAh battery. 10C continuous discharge rate of 5 amps with 7.5 amp bursts in accordance with our "Real Flight Rating" method. Maximum charge rate 0.5 Amps. Dimensions: 5mm x 22mm x 56mm Weight: 11 grams Please see our "Real Flight Rating" method that describes more specific use of "burst" discharge rates with our Li-Poly cells. Review this product + Add to my saved list			$5.95 Buy Now
	11.1 Volt - 500mAh 10C Li-Poly Pack Li Poly Features and Benefits 3 cell Lithium Polymer 500mAh battery pack. 10C continuous discharge rate of 5 amps with 7.5 amp bursts in accordance with our "Real Flight Rating" method. Maximum charge rate 0.5 Amps. Dimensions: 17mm x 22mm x 56mm Weight: 41 grams Please see our "Real Flight Rating" method that describes more specific use of "burst" discharge rates with our Li-Poly cells. Review this product + Add to my saved list			$16.95 Buy Now
	7.4 Volt - 1250mAh 10C Li-Poly Pack Li Poly Features and Benefits 2 cell Lithium Polymer 1250mAh battery pack. 10C continuous discharge rate of 12.5 amps with 18 amp bursts in accordance with our "Real Flight Rating" method. Maximum charge rate 1.2 Amps. Dimensions: 13mm x 34mm x 65mm Weight: 72 grams Please see our "Real Flight Rating" method that describes more specific use of "burst" discharge rates with our Li-Poly cells. Review this product + Add to my saved list			$17.95 Buy Now